Identifying Cerb Clutch

[spartacus]

Seems yet another cerbera clutch shortage upon us, just as I need one!

Does anyone know the spec of the one-fits-all clutch that AP currently do, i.e.. diameter, clamping pressure etc, found these on Demon Tweeks, they have a range.

[url]www.demon-tweeks.co.uk/products/ProductDetail.asp?cls=MSPORT&pcode=A/PCP6001-CH90-SF[/url]

[edhorne]

The one in the link looks like the old style clutch.

The new style one is pictured here. About halfway down.

www.pistonheads.com/gassing/topic.asp?t=265139&f=6&h=0&hw=bellhousing

Cheers

Ed

[DuncanM]

I will be crushed if I find out you can get the earlier clutch still .

Finally got my car back from the Clutch saga from hell (looooong story).

Duncan

[J.T.]

Does anyone happen to know where one can lay there hands on a clutch & slave cylinder?

Apparently AP have dozens on the shelf but the same old same old, vis a vis TVR paying their bills, appears to be severing supply.

JT

[spartacus]

J.T. said:

Does anyone happen to know where one can lay there hands on a clutch & slave cylinder? Apparently AP have dozens on the shelf but the same old same old, vis a vis TVR paying their bills, appears to be severing supply. JT

Indeed, thats why i am posting this thread.

[satman]

Got mine from Penninsula TVR....£581 IIRC!...

[350matt]

The later / current clutch spec is a 215mm / 8.5" diameter twin plate organic the AP part number is CP5282-34GRY.
The gearbox input shaft is 1" x 23 spline

Have the fingers gone on yours?

Matt

>> Edited by 350matt on Wednesday 31st May 12:59

[johnbear]

Try Dom at TVR Power for the clutch assembly cylinders.

[url]www.tvrpower.co.uk[/url]

or Julian at

[url]http://trackcarsolutions.net/shop/ind[/url]

I've got a new clutch seal kit if they are short at the moment




>> Edited by johnbear on Wednesday 31st May 13:33

>> Edited by johnbear on Wednesday 31st May 19:52