Could I build a Cerb for free?
Discussion
Good Thread.
I have -
A set of plug leads
A spare set of De-Cat Pipes
A Leven Gear Knob
Speedo
A couple of rear tyres
A spare under chasis strengthening plate
A set of the original Purple Pipes
A spare air box scoop
A couple of Orange front lower lights
A couple of old mats
A Diff sensor and mounting plate
Possibly some Sports Pipes (depending on how well the new ones are made / fit on Saturday)
I have -
A set of plug leads
A spare set of De-Cat Pipes
A Leven Gear Knob
Speedo
A couple of rear tyres
A spare under chasis strengthening plate
A set of the original Purple Pipes
A spare air box scoop
A couple of Orange front lower lights
A couple of old mats
A Diff sensor and mounting plate
Possibly some Sports Pipes (depending on how well the new ones are made / fit on Saturday)
Hmmm, this could get really interesting...
If someone (Gazza) pulls together a spreadsheet of everything needed, and it starts getting filled in by everyone willing to donate, then you can put all of the duplicate items on fleaBay to fund the purchase of anything missing.
Then you've got to wonder what would be the most fitting use for a collaborative Cerb project once complete...
If someone (Gazza) pulls together a spreadsheet of everything needed, and it starts getting filled in by everyone willing to donate, then you can put all of the duplicate items on fleaBay to fund the purchase of anything missing. Then you've got to wonder what would be the most fitting use for a collaborative Cerb project once complete...
I have lots of nuts and bolts that seemed to be spare once I had fixed something.
I have lots of tie wraps and some bits of tape.
Two old back tyres
A set of 16" wheels
A wiper motor
A keyfob
Some bits of alarm
1 Rear ARB
A sense of humour
Some bits of rubber trim from somewhere
Black mastic
Some number plates (these are quite specific
)
I also have some buckets of water, these can be applied to any cerbera footwell for a truly authentic feel.
I have an old childs swing and I can weld so I could probably make half the chassis (you may laugh but I did rebuild my M chassis a few years ago although to be honest I bought the proper steel).
I have some old bits of M and Griff kicking about it we decided to make it a hybrid
D
I have lots of tie wraps and some bits of tape.
Two old back tyres
A set of 16" wheels
A wiper motor
A keyfob
Some bits of alarm
1 Rear ARB
A sense of humour
Some bits of rubber trim from somewhere
Black mastic
Some number plates (these are quite specific
) I also have some buckets of water, these can be applied to any cerbera footwell for a truly authentic feel.
I have an old childs swing and I can weld so I could probably make half the chassis (you may laugh but I did rebuild my M chassis a few years ago although to be honest I bought the proper steel).
I have some old bits of M and Griff kicking about it we decided to make it a hybrid
D
Gassing Station | Cerbera | Top of Page | What's New | My Stuff




