Got me car cleaner needs a good t-cut though

[bovered79]

[booster]

Looks lovely!! Where are you? If you are near Wimborne I can do a full detail on that for £150.00. And even if you decide against please please please ditch the bloody T-Cut.

[bovered79]

I am in Hornchurch Essex got any other sugestions, I got it resprayed before it left oz and the panel shop has done a right pants job on it and there is over spray i need to get it off the paint is like sand paper.

[booster]

If it was me I'd try claying the area first (probably using a more agressive clay) followed by a less abrasive polish such as Poorboy's SSR2 by PC. If that didn't remove it I would go up to a more aggresive polish such as Menzerna IP or PB SSR2.5 or 3 and then back to a soft polish to bring it back ready for a sealant and wax. Good luck. If you want some advice on claying then you can em me.

[bovered79]

basically the whole car has over spray where abouts are you, are you anywhere near essex?

[booster]

you can email me at brian AT fenderboy.demon.co.uk

[Paul-C]

www.pistonheads.com/gassing/topic.asp?t=280971&f=23&h=0

Link to a thread I posted