VPN (using DG834) - client to client via host?

[aldi]

I've got a DG834 (192.168.0.x/24) connected to a NetPilot Remote (10.0.0.x/24) - great, wonderfull, no problems. Simultaneous internet/vpn access, nice.

Got another router (192.168.1.x/24) connected to the same NetPilot Remote - no problems.

How do I speak directly to the 192.168.1 subnet? If I try and traceroute to a 192.168.1 address it fannys out accross the internet and fails, rather than going down the VPN. Have tried to put a static route into the DG834 giving the router for the 192.168.1 subnet as the NetPilot's 10. address, still no bannanas. That's me out of ideas! Any suggestions greatfully received!

[GreenV8S]

I think you should find that each VPM acts as a virtual NIC at the client, and it's this NIC address that you need to find and put the route in for.

[aldi]

So rather than the NetPilot's 10. IP I need to find out the address of its VPN interface that faces my subnet... Will have a dig around in the menus!

Not obvious to be continued...

Edited by aldi on Monday 26th June 18:10

[dcw@pr]

www.pistonheads.com/gassing/topic.asp?t=148917&f=95&h=0