suspension bushes
Discussion
hi all
it is now time for me to start considering suspension bushes
i have the factory wish bones
but what do people recomend for the bushes
as my family motto is drive it like you stole it!!!!!
i need something that will take my kind of abuse
as hard cornering is what i love (apparently i will grow out of this my friends say usually after buying a volvo or people carrier)
thanks guys
it is now time for me to start considering suspension bushes
i have the factory wish bones
but what do people recomend for the bushes
as my family motto is drive it like you stole it!!!!!
i need something that will take my kind of abuse
as hard cornering is what i love (apparently i will grow out of this my friends say usually after buying a volvo or people carrier)
thanks guys
I used Super Flex. Part no SPF2043 –95 . Service is very good. It’s interesting the original bushes lasted only 10k miles.
www.superflex.co.uk
Tel.01749 678152
www.superflex.co.uk
Tel.01749 678152
splatspeed said:
Rubi said:
splatspeed said:
thanks neil
so i need 20 sets all the same
Sean
so i need 20 sets all the same
Sean
18 will be sufficient 4 inners at the front each side, four inners ar the rear each side plus one lower outer at the rear each side.
so what is the upper rear outside connected to??????
A rose joint
Rubi said:
splatspeed said:
Rubi said:
splatspeed said:
thanks neil
so i need 20 sets all the same
Sean
so i need 20 sets all the same
Sean
18 will be sufficient 4 inners at the front each side, four inners ar the rear each side plus one lower outer at the rear each side.
so what is the upper rear outside connected to??????
A rose joint
so why when i look at this pic
www.ultimasports.co.uk/gtr/design.html
for the wishbones for one side do i se 10 joints?????
dont get this
splatspeed said:
Rubi said:
splatspeed said:
Rubi said:
splatspeed said:
thanks neil
so i need 20 sets all the same
Sean
so i need 20 sets all the same
Sean
18 will be sufficient 4 inners at the front each side, four inners ar the rear each side plus one lower outer at the rear each side.
so what is the upper rear outside connected to??????
A rose joint
so why when i look at this pic
www.ultimasports.co.uk/gtr/design.html
for the wishbones for one side do i se 10 joints?????
dont get this
That design has been superceeded with a rose joint design. Have a look at Stig's build site under May 2005 there is a picture of the latest wishbone design.
Rubi said:
splatspeed said:
Rubi said:
splatspeed said:
Rubi said:
splatspeed said:
thanks neil
so i need 20 sets all the same
Sean
so i need 20 sets all the same
Sean
18 will be sufficient 4 inners at the front each side, four inners ar the rear each side plus one lower outer at the rear each side.
so what is the upper rear outside connected to??????
A rose joint
so why when i look at this pic
www.ultimasports.co.uk/gtr/design.html
for the wishbones for one side do i se 10 joints?????
dont get this
That design has been superceeded with a rose joint design. Have a look at Stig's build site under May 2005 there is a picture of the latest wishbone design.
i now see the problem but i have the old arms with 20 bushes
how important is this rose bush upgrade and can you get that alone
Sean
splatspeed said:
i now see the problem but i have the old arms with 20 bushes
how important is this rose bush upgrade and can you get that alone
Sean
I had the factory change mine to the rose joint. While they were at it I got them to change all the other bushes for the latest red bushes with the steel inserts.
Did'nt cost that much either.
Gassing Station | Ultima | Top of Page | What's New | My Stuff





