Toyota lump camshats options
Discussion
Hi all,
I'm looking for an engine upgrade for my '05 Exige,
I've already have an ITG intake and stage two exh.
It seems that there are is quite a choice of camshafts out there.
Toda,Trd and Piper (the latter with a choice of three specs)
Anyone experience about sticking with oem. ecu?
Roberto
I'm looking for an engine upgrade for my '05 Exige,
I've already have an ITG intake and stage two exh.
It seems that there are is quite a choice of camshafts out there.
Toda,Trd and Piper (the latter with a choice of three specs)
Anyone experience about sticking with oem. ecu?
Roberto
the piper cams are supposed to improve the power everywere, especially near the cam change over point.
To be honest no one really knows how effective they are since no one has put out some before and after dyno's, the tuning shops have but there hardly impartial, the ecu should'nt nessecarily be a problem ppl have put new cams in k series engines and seen good gains using the stock ecu, as to wether the same will be true for the yota who knows, ask around the various lotus forums see if anyones done it
To be honest no one really knows how effective they are since no one has put out some before and after dyno's, the tuning shops have but there hardly impartial, the ecu should'nt nessecarily be a problem ppl have put new cams in k series engines and seen good gains using the stock ecu, as to wether the same will be true for the yota who knows, ask around the various lotus forums see if anyones done it
Thanks you for your replies,
In Usa Ragnoroak offers upgrade packages up to 230 ps in n.a. for including
an ecu reflash, but so far I haven't heard clear owner feedback.
On the other hand the prospect of an Exige S let me a bit cold.
I was just looking at the yearly Autocar mag. 0-100-0 contest and I'm pretty
disappointed with the score. it posted a very good 0-30 of 1,67 but only a
meagre 0-60 of 4,67 - the n.a. Exige was 4,90- d being beaten by the Cayman S of
about a tenth onthe overall time. Also dislike the idea of increased kerb weight
most of it on the tail.
Cheers
Roberto
In Usa Ragnoroak offers upgrade packages up to 230 ps in n.a. for including
an ecu reflash, but so far I haven't heard clear owner feedback.
On the other hand the prospect of an Exige S let me a bit cold.
I was just looking at the yearly Autocar mag. 0-100-0 contest and I'm pretty
disappointed with the score. it posted a very good 0-30 of 1,67 but only a
meagre 0-60 of 4,67 - the n.a. Exige was 4,90- d being beaten by the Cayman S of
about a tenth onthe overall time. Also dislike the idea of increased kerb weight
most of it on the tail.
Cheers
Roberto
this american elise site www.elisetalk.com/forums/index.php has more info on yota tuning as that's the only engine option they have over there, ask on there engine related sub forum, there plenty of info there on various power upgrades, i'm sure someone on that site will have fitted the cams
Edited by peter450 on Saturday 8th July 09:37
i've been interested in cams for the yota lump also, but as i live in NZ I dont want to be the guinea pig.
I found this today on my travels.
www.komo-tec.com/product_info.php/products_id/403
Don't know if this is their own or using one of the piper cams.
Anyone brave enough yet?
I found this today on my travels.
www.komo-tec.com/product_info.php/products_id/403
Don't know if this is their own or using one of the piper cams.
Anyone brave enough yet?
I am not offering any solutions so please take this as being negative and this is my humble opinion.
Ragnorak SC kits have proven to be unreliable and your car is nothing more than a R&D testbed for ragnorak. The NA kits are very expensive for not a whole lot of gain.
Cam "upgrades" are unproven and the results I have seen have been with selective data and easy to pick big holes in.
The nature of the dual cam profile of the yota lump make it very hard to get significant gains without some sort of forced induction. If you must modify, then do the basics, lighten the flywheel, lighten the wheels then attack valves etc. Then wait for a decent SC.
I am a little bewildered as to your motives. If you wanted to do 0 to 100 drags then you should have brought a Mustang or a 'vette. This isnt what the lotus is about. Find some back roads and go through some bends faster than anything on wheels. A riced up civic can beat a 111R / Exige to 100, it is stuffed in the bends where the real driving happens.
Ragnorak SC kits have proven to be unreliable and your car is nothing more than a R&D testbed for ragnorak. The NA kits are very expensive for not a whole lot of gain.
Cam "upgrades" are unproven and the results I have seen have been with selective data and easy to pick big holes in.
The nature of the dual cam profile of the yota lump make it very hard to get significant gains without some sort of forced induction. If you must modify, then do the basics, lighten the flywheel, lighten the wheels then attack valves etc. Then wait for a decent SC.
I am a little bewildered as to your motives. If you wanted to do 0 to 100 drags then you should have brought a Mustang or a 'vette. This isnt what the lotus is about. Find some back roads and go through some bends faster than anything on wheels. A riced up civic can beat a 111R / Exige to 100, it is stuffed in the bends where the real driving happens.
Guys to good to hear all your thoughts.
I know the yota has proved to be a difficult lump to get more power out of.
I agree re ragnorak i think he is unreliable and i know of a Forced Fed engine that has rebuilt 4 time already.
For me a cam solution is interesting as it could provide the filling in that torque dip @4-6200rpm. My 111R is much better since i put the larini sports cat and exhaust on, they have partially filled that gap. It also seems to pull much harder now its got some miles on it. (approx 16000)
I think the car is plenty fast enough when you are pushing along but for road driving it would be nice if you could drive quickly in the 3-6000rpm range. The piper cams reportedly give nearly 20lb/ft @ 5800, this sounds FAB and I'm sure it wouldn't harm exiting the hairpin.
The SC sounds good but i like NA engines especially ones that rev to the sky hence the yota.
I know the yota has proved to be a difficult lump to get more power out of.
I agree re ragnorak i think he is unreliable and i know of a Forced Fed engine that has rebuilt 4 time already.
For me a cam solution is interesting as it could provide the filling in that torque dip @4-6200rpm. My 111R is much better since i put the larini sports cat and exhaust on, they have partially filled that gap. It also seems to pull much harder now its got some miles on it. (approx 16000)
I think the car is plenty fast enough when you are pushing along but for road driving it would be nice if you could drive quickly in the 3-6000rpm range. The piper cams reportedly give nearly 20lb/ft @ 5800, this sounds FAB and I'm sure it wouldn't harm exiting the hairpin.
The SC sounds good but i like NA engines especially ones that rev to the sky hence the yota.

Sorry Davey, I meant "camshafts"
Drac, If the Piper's claims is true, there is a minimum of 8ps gain at top end
and a considerable hike in the 5-6k rpm range. if so with a top end on the
a with bit of kerb weight reduction like forged wheels dry battery etc. who need
an Exige s @ 940-950 kg?
Roberto
Drac, If the Piper's claims is true, there is a minimum of 8ps gain at top end
and a considerable hike in the 5-6k rpm range. if so with a top end on the
a with bit of kerb weight reduction like forged wheels dry battery etc. who need
an Exige s @ 940-950 kg?
Roberto
Since you're from Italy, you might want to come to Switzerland and check out Bemani's SC that's been proven to be very reliable. Increased Kerb-weight is less than an Exige-S (Depending on your options, a Bemani Exige should weigh in at a bit over 900kg). 0-62mmph in 4.3s, 0-100mph in 9.7s (messured, not claimed).
Cheers Phil
Cheers Phil
Edited by Phil-CH on Wednesday 12th July 11:00
Gassing Station | Elise/Exige/Europa/340R | Top of Page | What's New | My Stuff




