Fitting an Emerald to a S160.
Discussion
Help, I am trying to fit an emerald to my sport 160 but it seems I may have an SVA set up in my WVA car, follow this if you can, all help appreciated.
I will start from the beginning. The ECU is an Elise Sport 160 ECM/A111E0046H. Homologation No L0000001.This is wired into the top of a silver metal box in the engine bay (attached to a metal plate that is screwed to the chassis and the engine side of the boot just under the throttle body).There is a 36 plug connector into the side of this metal box which when disconnected from the metal box the emerald will plug into. The problem is that when the metal box and the old ECU are disconnected there are still 4 wires attached to the wires that connect the old ECU and the metal box, these are hard wired to parts of the car. One a small black wire that comes from these wires becomes a brown wire at a connector, then it is wired into one of two fat brown wires that disappear forward into the engine bay. There is also 3 blue wires coming from the same wires that connect the ECU and the metal box, these go to what seems a sensor (Rover MHK 100600 9615 EP5577A on it) on the plenum (They have an outer black covering with the 3 blue wires inside it.)I have been advised to cut the black wire and tuck it away?? What do these 4 wires do? something surely. Lotus seems to reckon the black wire is a power feed from the solenoid?? Can anyone please advise how I should proceed. Thanks a confused Kiwikid.
I will start from the beginning. The ECU is an Elise Sport 160 ECM/A111E0046H. Homologation No L0000001.This is wired into the top of a silver metal box in the engine bay (attached to a metal plate that is screwed to the chassis and the engine side of the boot just under the throttle body).There is a 36 plug connector into the side of this metal box which when disconnected from the metal box the emerald will plug into. The problem is that when the metal box and the old ECU are disconnected there are still 4 wires attached to the wires that connect the old ECU and the metal box, these are hard wired to parts of the car. One a small black wire that comes from these wires becomes a brown wire at a connector, then it is wired into one of two fat brown wires that disappear forward into the engine bay. There is also 3 blue wires coming from the same wires that connect the ECU and the metal box, these go to what seems a sensor (Rover MHK 100600 9615 EP5577A on it) on the plenum (They have an outer black covering with the 3 blue wires inside it.)I have been advised to cut the black wire and tuck it away?? What do these 4 wires do? something surely. Lotus seems to reckon the black wire is a power feed from the solenoid?? Can anyone please advise how I should proceed. Thanks a confused Kiwikid.
Glad to hear you back in action Mark..... and if you don't manage to make the Emerald work I'll take it off your hands for you
Will be great to see Black Beauty back in action again!
I hope you don't mind, but I've copied and pasted this question onto the tech forums at SELOC as there's BOUND to be someone there that knows what's up, will let you know if anything turns up
Will be great to see Black Beauty back in action again!
I hope you don't mind, but I've copied and pasted this question onto the tech forums at SELOC as there's BOUND to be someone there that knows what's up, will let you know if anything turns up

Gassing Station | Elise/Exige/Europa/340R | Top of Page | What's New | My Stuff


