I finally got one (an SC that is)
I finally got one (an SC that is)
Author
Discussion

jamieall

Original Poster:

177 posts

261 months

Tuesday 11th July 2006
quotequote all
I have gathering info, doing a lot of waiting mainly for various parties to get their fingers out.
If you are interested to read about what I eventually went for have a look bellow - I am rather pleased with the results!

www.exiges.com/ubbthreads/showflat.php?Cat=&Number=68460&page=0&view=collapsed&sb=5&o=&fpart=1

hbaumhardt

950 posts

310 months

Tuesday 11th July 2006
quotequote all
I retract all my comments on bhp ... I want me one of them ... niiiiice

GTRene

22,798 posts

255 months

Tuesday 11th July 2006
quotequote all
wonderfull less shifting gears I think with that powerrrr well done
GTRene

NDT

1,767 posts

294 months

Tuesday 11th July 2006
quotequote all
Jamie,
so, the obvious question...
How much did it cost?

jamieall

Original Poster:

177 posts

261 months

Tuesday 11th July 2006
quotequote all
I used Currency Uk their rate was 2.24 my banks was 2.17
Base price 16900 CHF inc fitting and tax and dyno which equates to just over 7.5k
The work is exceptional it looks standard fit!

chris_n

1,232 posts

289 months

Wednesday 12th July 2006
quotequote all
Great write-up. Congratulations on what sounds like a fantastic upgrade. Your comments about performance of an Exige S dropping off when things get warm is interesting and is definitely consistent with what I am finding with mine. On a cool morning with clear roads it flies, but on a really hot day when I'm in and out of traffic there is a noticeable drop off in performance.

I think there is a lot to be said for charge-cooling, as you say.

Chris

drac

369 posts

254 months

Wednesday 12th July 2006
quotequote all
If i could work out how to drive to Switzerland i think i'd like one too. Unfortunately as i don't have the 007 edition elise i think i'm buggered.

Good job Jamie.

Jealous in New Zealand.

trimbo

1,099 posts

254 months

Wednesday 12th July 2006
quotequote all
congratulations. that looks like a fantastic piece of kit. where will you be getting the car serviced/maintained?

jamieall

Original Poster:

177 posts

261 months

Wednesday 12th July 2006
quotequote all
I will be getting the normal service at MMC in Edinburgh I also will be taking the car down once a year for a fetal at Plans as I trust them the most.

trimbo

1,099 posts

254 months

Wednesday 12th July 2006
quotequote all
Plans is quite near me, did they (or anyone else based in the UK) ever express an interest in supplying/fitting an SC?

jamieall

Original Poster:

177 posts

261 months

Wednesday 12th July 2006
quotequote all
There are companies which have sc kits in deveoplement but non will be as well proven as the swiss kit

starnberg

130 posts

244 months

Wednesday 12th July 2006
quotequote all
trimbo said:
Plans is quite near me, did they (or anyone else based in the UK) ever express an interest in supplying/fitting an SC?


Give Graham (@plans) a call if you're interested - he can sort *something* out for you...

Edited by starnberg on Wednesday 12th July 19:30

jamieall

Original Poster:

177 posts

261 months

Sunday 16th July 2006
quotequote all
Here are some pics


You can see here how good the engine bay is


This pic shows the standard induction kit with plumbing to the SC

Note the extra water bottle for the second water system

This is looking down at the manifold the engine is at the top of the pic and the boot at the bottom, you can see bellow the manifold and bellow the sc.


Bellow you can see the charge cooler sitting behind the back box next to the cat


Bellow is the air duct for the brakes

Here you can see the 2nd radiator








GTRene

22,798 posts

255 months

Sunday 16th July 2006
quotequote all
Nice work jamieall great pictures too! I was always wondering how they did this! RED motorsport in Germany has that bemani too on his race car with 304ps! and then I saw some same things too well done!
here is the Link to red motorsport who does bemani too so you don't have to drive that far?

www.red-motorsport.de/html/body_toyota.html

www.red-motorsport.de/html/toyota.html

have fun
GTRene


jamieall

Original Poster:

177 posts

261 months

Monday 17th July 2006
quotequote all
I worked out the difference in price between getting it from Red and from Switzerland and it was £1000 so I went to Switzerland!

maddog71

40 posts

250 months

Monday 17th July 2006
quotequote all
jamieall said:
I worked out the difference in price between getting it from Red and from Switzerland and it was £1000 so I went to Switzerland and spent it on loose woman and Beer


bruh_la

319 posts

285 months

Monday 17th July 2006
quotequote all
chris_n said:
Great write-up. Congratulations on what sounds like a fantastic upgrade. Your comments about performance of an Exige S dropping off when things get warm is interesting and is definitely consistent with what I am finding with mine. On a cool morning with clear roads it flies, but on a really hot day when I'm in and out of traffic there is a noticeable drop off in performance.

I think there is a lot to be said for charge-cooling, as you say.

Chris



I have noticed the performance drop off with mine aswell. I took it on the autobahn for a full throttle run, to see how it was at top speed. Every now and then someone would move into the fast lane so i would have to get off the gas. It took about fifteen mins of flooring it, braking, flooring it etc until i got a clear enough run that i could hold 150mph indicated, after a couple of mins of full throttle i felt the engine going off a bit and lost about 3/4mph which i could not get back no matter how long i stayed on it.

At hockenheim i noticed that in the the first session the car felt a bit sharper on the throttle, the problem is when it sits in the pit lane for half an hour the heat soak compüounds the problem.

I am contemplating what to do about this, a couple of guys who race the cup cars have fitted cooling pipework from the side intakes into the intercooler ducting. They told me this had reduced charge temps by 20 degrees on the track. Another alternative would be small fans like you see on oil coolers, these would have the advantage of being able to run in the pit lane when the car is stationary, thereby avoiding the heat soak problem.

The Bemani is a superbly engineered system, had the S not come out when it did i would have bought a std car and got the conversion. As it is i will need to get a 240 map and pulleys, Exhaust manifold, de cat etc and solve the heat problem to get up to the bemani output. (which will end up costing me about the same as the Bemani)

Well in Jamie you have a superb machine......

GTRene

22,798 posts

255 months

Monday 17th July 2006
quotequote all
chris_n said:
I think there is a lot to be said for charge-cooling, as you say.

Chris



bruh_la said:
The Bemani is a superbly engineered system, had the S not come out when it did i would have bought a std car and got the conversion. As it is i will need to get a 240 map and pulleys, Exhaust manifold, de cat etc and solve the heat problem to get up to the bemani output. (which will end up costing me about the same as the Bemani)

Well in Jamie you have a superb machine......


And also a small bemani good thing is, you have not the intercooler in your rear view mirror, and not that weight on top! on a wrong place....
I love to own a Exige S or the 240R but reading all the writings and little other things, me also thinks that bemani is not such a bad idea and in the Swiss there are some on sale! 4 or so I believe but sadly not in the Netherlands...though I saw a honda converted Elise mk2 2001 for sale, but they asking a whopping 48.500,-euro's for it! thats madness for a 2001 car and 210ps...
Better buy one in Germany I saw a 2003 car very nice typ 25 with hardtop for 25.000,- ad some 5.000,- rest bpm(tax) and 20.000,- honda sc conversion...and you have a beast
GTRene

Edited by GTRene on Monday 17th July 11:43

Phil-CH

1,132 posts

295 months

Monday 17th July 2006
quotequote all
jamieall said:
I have gathering info, doing a lot of waiting mainly for various parties to get their fingers out.
If you are interested to read about what I eventually went for have a look bellow - I am rather pleased with the results!

www.exiges.com/ubbthreads/showflat.php?Cat=&Number=68460&page=0&view=collapsed&sb=5&o=&fpart=1


Congratulations Jamie on getting the Bemani fitted. I'm still lagging behind a bit unfortunately - will get mine in April of next year the latest though. May I ask if you have a MY06 model or older?

Cheers from Zurich, Phil

jamieall

Original Poster:

177 posts

261 months

Monday 17th July 2006
quotequote all
05 car so loose some tourque prior to the cam change