boot catch need help
boot catch need help
Author
Discussion

nickp1971

Original Poster:

73 posts

256 months

Wednesday 12th July 2006
quotequote all
my boot would not shut on closer inspection i removed the catch in the boot to find a wire atached to it has snapped any idea,s how can get to the other end to repair this?

Tyre Smoke

23,018 posts

290 months

Wednesday 12th July 2006
quotequote all
Guessing, the other end is at the switch behind the 'Cerbera' badge. Peel back the boot lining et voila!

bigjohnBOY

371 posts

288 months

Thursday 13th July 2006
quotequote all
The other end is connected to a solenoid basicaly behind the door release badge, when I say connected the wire has a bend in it which passes through a hole in the solenoid plunger.
Just had to replace the solenoid on mine easy job.


John

mike_e

595 posts

292 months

Thursday 13th July 2006
quotequote all
Either the wire has snapped or the collar that actuates the lock release lever has come loose and dropped off. Either way you'll need to find the collar and possibly a new bit of wire to repair it. The collar has a grub screw in the side which allows for adjustment of the mechanism.

Release motor is behind the badge and inside the inner boot skin. Pull back the carpeting to expose the access hole, motor is held in with two screws.

Duke Thrust

1,680 posts

268 months

Thursday 13th July 2006
quotequote all
I had this problem, peel the carpet back by the latch and use your fingers to release (give it a prod) the mechanism, you should hear it snap back as it frees itself.

Never had a problem with it since.

TooTall Paul

938 posts

276 months

Thursday 13th July 2006
quotequote all
Has the spring come off or snapped ??

nickp1971

Original Poster:

73 posts

256 months

Thursday 13th July 2006
quotequote all
hi the spring is on the is just a piece of wire attched to no where now

TooTall Paul

938 posts

276 months

Thursday 13th July 2006
quotequote all
If the catch is working properly the boot would shut even if the cable had snapped.

nickp1971

Original Poster:

73 posts

256 months

Thursday 13th July 2006
quotequote all
the boot would shut but then how would i release it!

Duke Thrust

1,680 posts

268 months

Thursday 13th July 2006
quotequote all
TooTall Paul said:
If the catch is working properly the boot would shut even if the cable had snapped.


Whoops, sorry, didn't read the original post properly.

I'll see if I can take a picture tonight if that's any help?

gbbird

5,197 posts

273 months

Thursday 13th July 2006
quotequote all
TooTall Paul said:
Has the spring come off or snapped ??


Slightly off topic, but i think i need a new spring. Does anyone know what these are from, and where i can get one?

Cheers

nickp1971

Original Poster:

73 posts

256 months

Thursday 13th July 2006
quotequote all
hi fitted new motor with bigger piece of wire what a ball ache all works tho hi ref parts try bell hillgarage