Brake Clunking at the front. Problem or case of TADTS?
Discussion
Just driven my S1 Elise up the M1 from London to Sheffield. Coming off the motorway, I noticed that if I braked hard, the was a clunk noise coming from the brakes. Hard to describe, just comes once (as opposed to continuous) when I press the brake down hard as if something is freeing up, but could feel it through the pedal and steering wheel also. Brake performance is fine, and if I pump the brakes, by the second or third 'pump' the clunk goes and the brake pedal can be pressed down smoothly.
Have never noticed it before, and the car has just come out of a service with new pads and discs all round. Could it be related to this? Or is it a case of the TADTS??
Also (and I appreciate this is probably a dumb question) should the brake pad to the outside of the disc visbily move when the brakes are applied? If so what clearance is normal as looking at all 4 wheels, the external pad seems to be right against the disc. Even with this though, the discs are not overly hot when I finished driving today and car is not pulling to the side or slowing down excessively when I coast.
Maybe just some paranoia after an extended time without driving her...
Have never noticed it before, and the car has just come out of a service with new pads and discs all round. Could it be related to this? Or is it a case of the TADTS??
Also (and I appreciate this is probably a dumb question) should the brake pad to the outside of the disc visbily move when the brakes are applied? If so what clearance is normal as looking at all 4 wheels, the external pad seems to be right against the disc. Even with this though, the discs are not overly hot when I finished driving today and car is not pulling to the side or slowing down excessively when I coast.
Maybe just some paranoia after an extended time without driving her...
If the pads are a bit loose in the caliper, that could be causing the clunk and as the heat and expand a little, things tighten up but if you can actually feel it throgh the steering, then it's quite a bit of movement.
Best idea might be to get the front wheels off and see how much movement the pad has inde the caliper, ift should be a good fit but able to slide out easily. If they're a bit loose, put double sided foam tape down the edges of the pad (top and bottom as they sit in the caliper) and cover the exposed sticky side in copper grease - copyright RobC on SELOC
Best idea might be to get the front wheels off and see how much movement the pad has inde the caliper, ift should be a good fit but able to slide out easily. If they're a bit loose, put double sided foam tape down the edges of the pad (top and bottom as they sit in the caliper) and cover the exposed sticky side in copper grease - copyright RobC on SELOC

Cheers Cuzza, will have a look. It seems to have settled down and is worse after a long drive so as you say it is related to it warming up and cooling down. It's just survived two consecutive Walshy days and still work ok, but will take the wheels off as you suggest for a looksie at what play there is.
Gassing Station | Elise/Exige/Europa/340R | Top of Page | What's New | My Stuff


