One thing after another, now i have no indicators!
One thing after another, now i have no indicators!
Author
Discussion

markizok

Original Poster:

644 posts

279 months

Sunday 16th July 2006
quotequote all
Guys,

For some reason my indicators now no longer work - only realised when I tried to put my hazards on yesterday.

I had been wondering why so many people had been getting agro with me - I originally put it down to jealousy!

Anyway, is this something that has happened to anyone else? Is it an easy fix?

Cheers
MR

jondude

2,441 posts

248 months

Sunday 16th July 2006
quotequote all
Do you get a fast ticking indicator light on the Stack?

If so, chances are a bulb has blown. Easy but fiddly to do. ( Wheel arch liner pulls back and you can easily reach the bulb holder )

If you get no dash signal, I'd suspect a fuse. Easy to check and replace.

markizok

Original Poster:

644 posts

279 months

Sunday 16th July 2006
quotequote all
its dead as a doe-doe nothing at all. looks like it may be a fuse blown, any idea where the fuse box is on an s2.

jondude

2,441 posts

248 months

Sunday 16th July 2006
quotequote all
Must admit, I don't !

I usually google ' sandsmuseum ' ( have no idea why it is called so ) for some excellent guides.

I also think the 'seloc' site has a link to ' elisefaq ' which should cover it.

The good news is this certainly does sound like the fuse.

tanman

505 posts

266 months

Sunday 16th July 2006
quotequote all
The fuse box is located under the front panel on the passenger side, its under a black deflector shield. However this happened to me and it was not the fuse, i had knocked the hazard warning switch getting in/out. not enough to set the hazads off but enough to stop the indicators working, check this first before going to the fuse box as it can be a bit fiddly (well i found it a bit fiddly, but then again i'm useless at things like that)
Hope you get it sorted
Tanman

Dave_s2_111s

246 posts

259 months

Sunday 16th July 2006
quotequote all
more than likely the hazzord switch. Its about the only thing that cann cause this fault. The only reason the fuse would blow is if you had been fiddling with the indicator wires and shorted them out.

Have you used the hazzord switch recently? If so then that will be it. Try fiddling about with the switch while one of your indicators is on and sif they come on.

just1

703 posts

265 months

Sunday 16th July 2006
quotequote all
Hi mate, Had a similar problem earlier this year, the relay on the indicators had blown, was a five minute job.

DPR

95 posts

260 months

Sunday 16th July 2006
quotequote all
Dave_s2_111s said:
more than likely the hazzord switch. Its about the only thing that cann cause this fault. The only reason the fuse would blow is if you had been fiddling with the indicator wires and shorted them out.

Have you used the hazzord switch recently? If so then that will be it. Try fiddling about with the switch while one of your indicators is on and sif they come on.


Yep, its the hazard switch - it'll be in the on position, but not actually on, thus preventing your indicators from working.

Push it in again to turn it off.

Happened to me a few months back - scared the hell outta me, was thinking ££££....

hbaumhardt

950 posts

310 months

Sunday 16th July 2006
quotequote all
I had this the other day (from SELOC): "Odd problem. With the hazard warning button in its backlight is on and the indicators work. Press the hazard warning button so it pops out, the backlight goes out no hazard warnings and the indicators dont work. Do we recon its a) the switch or b) the relay (and where is the relay) ?"

Turned out it was the switch which I managed to fix by cleaning with electrical solvant (a new one # A340M6016F is only £12) but it is glued in from the back so you need to cut thru the glue to remove and re bond it when finished.

Edit to say that the hazards not working is an MOT fail and the cops can ticket you for this if you are at the side of the road.

Edited by hbaumhardt on Monday 17th July 09:04

markizok

Original Poster:

644 posts

279 months

Tuesday 18th July 2006
quotequote all
Got the indicator sorted but the hazards don’t work now, very strange!

GTRene

22,793 posts

255 months

Tuesday 18th July 2006
quotequote all
hm...if you ask me she realy wants your attention, and touch some strings and buttons
GTRene