Word of warning RE S2 immobolisers
Word of warning RE S2 immobolisers
Author
Discussion

poptosis

Original Poster:

850 posts

277 months

Thursday 20th July 2006
quotequote all
Make sure you don’t hang around changing the battery on your immobiliser fob guys and gals. Apparently if you leave it without power for 30 seconds or so, it looses synchronicity with the immobiliser. As a consequence one can get ever so slightly stranded like I did yesterday.

Arse.

Regards,

pop

siwil1

1,022 posts

262 months

Friday 21st July 2006
quotequote all
Thanks for the advice.

is it a fiddly job?

and how often do they need changing?

edswales

43 posts

250 months

Friday 21st July 2006
quotequote all
easy to do; use your nail to pry the two sections apart, you'll know when it's time to change them because the central locking will take a while to respond and when you press the button the red light won't flash.

To re-synchronise the fob, press down both buttons and hold until the flashing light stops, then release both at the same time - the light will then stay red. Wait a bit then press the open button for about a second and a half - the car should open and the fob will be re-synchronised.

dave_s2_111s

246 posts

259 months

Friday 21st July 2006
quotequote all
well said eds

Its a simple operation to syncronise the fob to the alarm. Its in the owners manual too.

P.s: This is the case with 99% of imobilisers and alarms as there is no back up battery in the fob.

rixge

292 posts

256 months

Friday 21st July 2006
quotequote all
Another thing to maybe think about and to keep on you at all times, is the key code number. The four digit number you use to override the immobiliser.

jondude

2,441 posts

248 months

Friday 21st July 2006
quotequote all
Doesn't the S2 come with a manual override stick?

I think I have a pencil type thing which will mobilise the car in the event of the fob not working. Well, I know I do - it is on the key ring....just can't remember exactly what it is for........