Dirt on inside of headlamp cover - 111R
Discussion
Hi all.
Is it possible to clean the inside of the headlamp covers on an S2 by taking the plastic cover off? Not really looked into it on the S2 and wouldn't want to damage anything. On the old S1 it was easy.
I've got a dirt mark about the size of a 10p in the middle of the inside cover - looks a bit cr*ppy and is bugging the hell out of me. The rest of the car looks spotless apart from this.
If it's not possible, I'll get the dealer to sort it under warranty - the car is only a month old and didn't spot it 'til I got home...
Cheers,
Balders
Is it possible to clean the inside of the headlamp covers on an S2 by taking the plastic cover off? Not really looked into it on the S2 and wouldn't want to damage anything. On the old S1 it was easy.
I've got a dirt mark about the size of a 10p in the middle of the inside cover - looks a bit cr*ppy and is bugging the hell out of me. The rest of the car looks spotless apart from this.
If it's not possible, I'll get the dealer to sort it under warranty - the car is only a month old and didn't spot it 'til I got home...
Cheers,
Balders
alicrozier said:
3 screws in the wheelarch and the cover comes off.
Quick and easy job if it's bugging you.
Cheers,
Ali
Quick and easy job if it's bugging you.
Cheers,
Ali
Quick easy job!?!?!
Whip the wheel off. Then take off the inner arch liner. Then the cover is either the 3 nuts or the 3 allen bolts. Not a quick job. For a bulb change I can do it in about 30 - 35 mins a side.
While I remember the cover also has the shrouding for the lights so you have to do a little key hole surgery to get the thing clean. PITA
Edited by gooby on Tuesday 25th July 11:44
gooby said:
alicrozier said:
3 screws in the wheelarch and the cover comes off.
Quick and easy job if it's bugging you.
Cheers,
Ali
Quick and easy job if it's bugging you.
Cheers,
Ali
Quick easy job!?!?!
Whip the wheel off. Then take off the inner arch liner. Then the cover is either the 3 nuts or the 3 allen bolts. Not a quick job. For a bulb change I can do it in about 30 - 35 mins a side.
While I remember the cover also has the shrouding for the lights so you have to do a little key hole surgery to get the thing clean. PITA
Edited by gooby on Tuesday 25th July 11:44
Sorry Gooby, are the screws under the liner these days?
On my old S2 (52 plate) you could access these easily without taking off the wheel (not checked on the Exige).
I agree that cleaning inside of the cover will be tricky 'cos the shroud is bonded on...
alicrozier said:
Sorry Gooby, are the screws under the liner these days?
On my old S2 (52 plate) you could access these easily without taking off the wheel (not checked on the Exige).
On my old S2 (52 plate) you could access these easily without taking off the wheel (not checked on the Exige).
Yeah it's the same with mine on my model year 04 111S - you can undo the 3 x bolts on the inside of the wheel arch without taking off the liner (there's a hole to get to them).
Once the light is out you can't clean the WHOLE of the inside of it though as it's all bonded together and you can't get proper access to it!
Cheers guys. I thought it might be bonded on but hadn't looked.
Any suggestions on what I could use to reach inside the plastic shrouding? Its up near the top and I notice theres a hole at the bottom. Was thinking pipe cleaners or something along those lines but don't want to make it worse by scratching the inside...
Cheers,
Balders.
Any suggestions on what I could use to reach inside the plastic shrouding? Its up near the top and I notice theres a hole at the bottom. Was thinking pipe cleaners or something along those lines but don't want to make it worse by scratching the inside...
Cheers,
Balders.
Gassing Station | Elise/Exige/Europa/340R | Top of Page | What's New | My Stuff


