Honda VTEC conversions
Discussion
Hello everyone,
I'm just about to buy my very first Elise after returning from a trip in Germany at the Nurburgring and going out in one as a passager. I have the intention to carry out a Honda VTEC conversion myself , is there any sites with "How to's" around or any threads etc with more info as i'm really struggling to find anything ?
Many thanks,
Jim
I'm just about to buy my very first Elise after returning from a trip in Germany at the Nurburgring and going out in one as a passager. I have the intention to carry out a Honda VTEC conversion myself , is there any sites with "How to's" around or any threads etc with more info as i'm really struggling to find anything ?
Many thanks,
Jim
Try SELOC (www.seloc.org). Bear in mind there have been some controversial threads on the topic and lots of pissing matches so it might take a while to sift through and work out which of the protagonists have an axe to grind.
The most conversions have been done by Maidstone Sports Cars, using the Link-Up kit.
There are other Link-Up dealers. Its well regarded with quite lot of track day nuts flogging them senseless without trouble.
Blink were also known for conversions, not sure if they are still doing them.
Sinclaires are now also doing them.
Edwards brothers have done some.
There is a DIY kit recently on the market, not heard of any installs done yet.
Given the costs involved you need to check carefully to work out the differences in what you're going to get for you money.
BTW, I was at the ring in a black elise, it wasn't me you took a pax lap with was it?
Dave
The most conversions have been done by Maidstone Sports Cars, using the Link-Up kit.
There are other Link-Up dealers. Its well regarded with quite lot of track day nuts flogging them senseless without trouble.
Blink were also known for conversions, not sure if they are still doing them.
Sinclaires are now also doing them.
Edwards brothers have done some.
There is a DIY kit recently on the market, not heard of any installs done yet.
Given the costs involved you need to check carefully to work out the differences in what you're going to get for you money.
BTW, I was at the ring in a black elise, it wasn't me you took a pax lap with was it?
Dave
Have a read over on SELOC. Here's a good place to start... http://forums.seloc.org/viewthread.ph
Just a point but no one will sell you the kit to do it yourself (due to liability I think) and there are LOTS of different bits needed, It's end up costing you more and not being as neat and tidy and reliable as the BK/MSC/Blink/Sinclaires/Edwards etc conversions, which are all top drawer.
Have a look on SELOC for information about the SUN conversion as they are the first people to ship a kit - don't expect to save loads of cash though. I don't know if its any good or whether anyone has actually done it in the UK yet. It is not a trivial conversion though and my advice would be to stump up the extra cash and get it done by someone with a proven record.
I have a conversion in my Exige S1 from the Edwards Boys (they are not brothers - Martin and Steve both look great for their ages but they are in fact Father and Son
).
I have a conversion in my Exige S1 from the Edwards Boys (they are not brothers - Martin and Steve both look great for their ages but they are in fact Father and Son
). mr_c said:
Just a point but no one will sell you the kit to do it yourself (due to liability I think) and there are LOTS of different bits needed...
Not true, the SUN kit is now available, but as mentioned, no-one has done it... yet!
mr_c said:
...It's end up costing you more and not being as neat and tidy and reliable as the BK/MSC/Blink/Sinclaires/Edwards etc conversions, which are all top drawer.
This is however a fair point, and one which is raised frequently.
The Link-up kit which I have in mine is race proven over several hundred thousand miles of testing and development, plus it is proven in several hundred road cars. It's backed up by professionals with years of experience, a bullet-proof warranty and excellent support. Ingoring the histrionics you may see in various debates, it is a superb piece of kit and totally transforms the car.
Not one person I've taken out in it, or let drive it has been anything short of stunned at the workmanship and neatness of the installation and the power delivery. IMvHO it is worth every penny.
S Works said:
mr_c said:
Just a point but no one will sell you the kit to do it yourself (due to liability I think) and there are LOTS of different bits needed...
Not true, the SUN kit is now available, but as mentioned, no-one has done it... yet!
ahh yes, I'd forgotten the Sun kit.
Even with all the bits laid out infront of you, I wouldn't say it was ever going to be easy to do yourself.
Morning,
A very good friend of mine is a mechanic of 20+ years and is well acustomed to taking apart and rebuilding engines. He is willing to revamp a honda civic type r engine for me and add a supercharger which i will have to buy. Is this advisable and how much do you think i could pick up an engine and supercharger for? Any companies you may know would be much appreciated.
I know Honda would probably charge about 5-6k for a new civic engine from factory but is it advisable to obtain a written off civic's engine (obviously by side or rear impact so engine is not damaged with low mileage)
Apologies for stealing your thread!!!
A very good friend of mine is a mechanic of 20+ years and is well acustomed to taking apart and rebuilding engines. He is willing to revamp a honda civic type r engine for me and add a supercharger which i will have to buy. Is this advisable and how much do you think i could pick up an engine and supercharger for? Any companies you may know would be much appreciated.
I know Honda would probably charge about 5-6k for a new civic engine from factory but is it advisable to obtain a written off civic's engine (obviously by side or rear impact so engine is not damaged with low mileage)
Apologies for stealing your thread!!!
I'm sure he could 'install' it for you as it is, but that's only part of it.
He's going to have to get the ECU to 'talk' to the rest of the car.
How is he going to get a map more suitable to the application in the Elise/Exige?
He'll have to create you a custom subframe, mounts, gear linkage, a custom loom etc.
All that is going to add up and incur large labour costs.
Then is it going to have a warranty? Are you happy to be his guinea pig?
The debate has been had many, many times over on SELOC. I'd suggest having a really good search and read of threads over there to have a look at what's been considered and suggested before. Could end up in tears with a very large bill.
He's going to have to get the ECU to 'talk' to the rest of the car.
How is he going to get a map more suitable to the application in the Elise/Exige?
He'll have to create you a custom subframe, mounts, gear linkage, a custom loom etc.
All that is going to add up and incur large labour costs.
Then is it going to have a warranty? Are you happy to be his guinea pig?
The debate has been had many, many times over on SELOC. I'd suggest having a really good search and read of threads over there to have a look at what's been considered and suggested before. Could end up in tears with a very large bill.
S Works,
Warranty is a big factor, i dont want my car blowing up because then i would be upset. He has done work on my previous cars in the past and they worked fine but you never know when it will go wrong. My friend has access to a rolling road which will help with the ECU mapping and talking. I think i could get warranty out of it, would be silly not to.
I dont know too much about engine transplants of this sort, is there a lot of work to get the engine to fit in / linked up to all the original wiring, connections etc and buing of many differen parts...
Have you any idea how much it would be to pick up a basic engine for and a SC? just so i can start to think about cost?!? This might be one for bogie to jump into aswell... (i'll have to join the seloc site)
Warranty is a big factor, i dont want my car blowing up because then i would be upset. He has done work on my previous cars in the past and they worked fine but you never know when it will go wrong. My friend has access to a rolling road which will help with the ECU mapping and talking. I think i could get warranty out of it, would be silly not to.
I dont know too much about engine transplants of this sort, is there a lot of work to get the engine to fit in / linked up to all the original wiring, connections etc and buing of many differen parts...
Have you any idea how much it would be to pick up a basic engine for and a SC? just so i can start to think about cost?!? This might be one for bogie to jump into aswell... (i'll have to join the seloc site)
slatess1 said:
S Works,
Warranty is a big factor, i dont want my car blowing up because then i would be upset. He has done work on my previous cars in the past and they worked fine but you never know when it will go wrong. My friend has access to a rolling road which will help with the ECU mapping and talking. I think i could get warranty out of it, would be silly not to.
Warranty is a big factor, i dont want my car blowing up because then i would be upset. He has done work on my previous cars in the past and they worked fine but you never know when it will go wrong. My friend has access to a rolling road which will help with the ECU mapping and talking. I think i could get warranty out of it, would be silly not to.
I'd suggest check what he'll offer first before you embark on it, and compare that to what is offered by the alternatives. The good kits have been put together after exhaustive trials and development, I'm no engineer, but I'm 100% sure that starting from scratch will not be a walk in the park.
slatess1 said:
I dont know too much about engine transplants of this sort, is there a lot of work to get the engine to fit in / linked up to all the original wiring, connections etc and buing of many differen parts...
As above, I'm no expert but it will not be simple. Check out the threads and read what the likes of Simon Scuffham, Bernard Scouse & Geary (eliseparts) have to say about their conversions (Honda, Audi & Duratec respectively). Each has invested large amounts of time and money to get where they are today.
slatess1 said:
Have you any idea how much it would be to pick up a basic engine for and a SC? just so i can start to think about cost?!? This might be one for bogie to jump into aswell... (i'll have to join the seloc site)
Honestly no I don't, I imagine you could get an engine for a few thousand pounds but personally this route does not appeal to me in the slightest.
bogie knows a lot more about the options than I, plus he has contacts at Sinclaires who have developed their own Honda kit.
SELOC is your friend on this topic - search away...
Gassing Station | Elise/Exige/Europa/340R | Top of Page | What's New | My Stuff



