Discussion
New owner of a S1 111S. New member here. Firstly thanks everyone for all the advice links etc. Invaluable. Pagid 4-2s fitted today. Braided hoses shortly. OBO bath seal to remove clean and refit the headlight covers (great one that) etc etc...
Bought the car 2 weeks ago and was lucky enough (so I read) that it had just been fitted with Nitron shocks all round - still no dirt on them yet. Whilst it looks nice being lower, I'm concerned that the geometry has been upset and would rather it was jacked up to the original height. (It's about 120mm at the mo and I seem to have lots of rear neg camber.) Dumb question I'm sure but...you know that big nut that wraps around the main body of the shock that sits ontop of the coil spring. Can I adjust ride height with that? In other words, can I crank it down and effectively lift the car up OR will it not actually lift the car, just preload the spring more?
Advice gratefully received.
Bought the car 2 weeks ago and was lucky enough (so I read) that it had just been fitted with Nitron shocks all round - still no dirt on them yet. Whilst it looks nice being lower, I'm concerned that the geometry has been upset and would rather it was jacked up to the original height. (It's about 120mm at the mo and I seem to have lots of rear neg camber.) Dumb question I'm sure but...you know that big nut that wraps around the main body of the shock that sits ontop of the coil spring. Can I adjust ride height with that? In other words, can I crank it down and effectively lift the car up OR will it not actually lift the car, just preload the spring more?
Advice gratefully received.
Bill,
My advice, get it geo'd by a pro - someone that really knows what they are doing with Elises.
I'm sure somebody can point you to someone down your way.
120 is not very low for a Nitron'd Elise, I'd be going lower! However, for road use it should be fine.
Sounds like you might just need everything setting up again, particularly if it wasn't done after the shocks were fitted.
There are so many adjustments for the suspension geometry, you could start fiddling and then get yourself in a right pickle!
Dunc
My advice, get it geo'd by a pro - someone that really knows what they are doing with Elises.
I'm sure somebody can point you to someone down your way.
120 is not very low for a Nitron'd Elise, I'd be going lower! However, for road use it should be fine.
Sounds like you might just need everything setting up again, particularly if it wasn't done after the shocks were fitted.
There are so many adjustments for the suspension geometry, you could start fiddling and then get yourself in a right pickle!
Dunc
As DSS says, get it geo'd by a pro.
The chances are that if someone has spent Nitron sort of money, they've had this done already, in which case if you simply raise it to standard ride height again, you'll be destroying geometry which has already been correctly set.
Yopu can alter the ride height simply by screwing the spring seats up and down, but doing this not only alters ride height, it alters corner weights too...you can easily end up with the automotive equivalent of a stool with one leg shorter than the other three.
Go to a specialist who can not only do geo, but who can set corner weights as well. He will ba able to set any ride height you choose, advise on correct camber and damper settings to suit your requirements, and set corner weights to optimise weight distribution with you in the car.
The chances are that if someone has spent Nitron sort of money, they've had this done already, in which case if you simply raise it to standard ride height again, you'll be destroying geometry which has already been correctly set.
Yopu can alter the ride height simply by screwing the spring seats up and down, but doing this not only alters ride height, it alters corner weights too...you can easily end up with the automotive equivalent of a stool with one leg shorter than the other three.
Go to a specialist who can not only do geo, but who can set corner weights as well. He will ba able to set any ride height you choose, advise on correct camber and damper settings to suit your requirements, and set corner weights to optimise weight distribution with you in the car.
Edited by Sam_68 on Friday 28th July 12:12
hbaumhardt said:
If you run your Nitrons too high you will run out of droop travel (or something like that) which will upset the handling. TALK TO A SPECIALIST anhd I see your in Hants so Plans, Lakeside, Swlotus can all deal with Nitrons.
Gassing Station | Elise/Exige/Europa/340R | Top of Page | What's New | My Stuff


