Formatting a machine with a RAID Array

[Wildfire]

I am due to replace the windows system on a workstaion. It's primary HDD is SCSI and the secondary is a SATA RAID array running off a PCI card.

I've not really too much experience with RAID Arrays so I have a few questions.

If I format the C drive alone, this will not affect any data or configurations on the RAID array right? Also windows SP should pick up the SATA card?

Thanks

Chris

[pdV6]

Formatting the non-RAID drive won't affect the data in the RAID array. However, you will need to re-load the driver for the RAID controller card after reinstalling Windows to be able to access it.

[aldi]

I'd look carefully in disk managment to double check that the partitions are laid out the way you'd expect.