If I want to get rid of my MMCs..............
Discussion
.....what do I need? After reading 150 reasons, I am keeping the little bastid and am now thinking of making those final upgrades during the coming winter. So where do I start? New hubs? New Calipers? Or is it a simple straight swap with some steel (x-drilled) discs with normal pads.
Are there any recommendations for manufacturers/suppliers? I will be doing the work myself so anything that I should be looking out for? All help on the matter will be greatly appreciated.
Next mod will no doubt be the S2 Bilstein upgrade, look out Bank manager, here I come!!
Are there any recommendations for manufacturers/suppliers? I will be doing the work myself so anything that I should be looking out for? All help on the matter will be greatly appreciated.
Next mod will no doubt be the S2 Bilstein upgrade, look out Bank manager, here I come!!
jaykaybi said:
Good luck getting hold of Bilsteins - I'm informed they are currently back ordered well into next year, hence today I am replacing my knackered rear dampers with yet more Konis.
Edited by jaykaybi on Tuesday 1st August 13:37
That is a bit pants!
Have you tried one of the Seloc guys, can't recall his name, he deals with second hand kit I believe.
Why do you want to get rid of the MMC's? They're absolutely brilliant. Ok so in the wet they may need a little prod to clear the film of water off the discs and in the dry they squeal like feck, but you can't beat them for power and feel, and even lapping the nurburgring mine never faded or overheated, where everyone else was getting fade etc half way in!!!
Also, they're lighter than Iron ones so you've got less unsprung weight.
Leave them on!!!
Also, they're lighter than Iron ones so you've got less unsprung weight.
Leave them on!!!
I believe there are some anti squeal shims available from lotus. Others have suggested packing the back of the pad with grease. My preferred method is a few big stops to get some heat into them!!! Or put up with the squealing. It is quite embarressing though going through a town when one of the brakes starts rubbing and squealing.. haha.
I think pads last about 70k miles and discs about 100k. After the discs have gone it might make financial sense to go to Iron, all you need to buy are the discs and pads to change mate.
I think pads last about 70k miles and discs about 100k. After the discs have gone it might make financial sense to go to Iron, all you need to buy are the discs and pads to change mate.
Gassing Station | Elise/Exige/Europa/340R | Top of Page | What's New | My Stuff


