Wheel and Gear Lever Question?
Wheel and Gear Lever Question?
Author
Discussion

as400

Original Poster:

161 posts

243 months

Saturday 5th August 2006
quotequote all
www.lotusofscottsdale.com/30005.html

Would like to get these wheels on my S2 wrapped with Yokohama A048.

Currently I have standard S2 alloys, can anyone recommend the most economical way to purchase?...I'm presuming a dealership may charge a premium, does anywhere do a part ex for my existing perfect silver alloys?

Also:

How difficult/expensive would it be to change this type of gearlever

www.elises.co.uk/models/s2/interior.jpg

to this design:

www.parkers.co.uk/choosing/carreviews/gallery/?img=1&model_id=435&category=Interior%20detail

While changing the lever design would anyone recommend the short-shift upgrade?

Dave_s2_111s

246 posts

259 months

Saturday 5th August 2006
quotequote all
ok
So heres what i can tell you.

Wheels are a no go as that is an american model and also has the toyota engine therefor the geo is set up differently. Im not sure on stud pattern though. People have put s2 exige wheels on the s2 elise but would need spacers on the rear and geo set-up. I think im right in thinking ideally the suspension would need changing, but i may be talking sh**e.

see this link:
www.pistonheads.com/gassing/topic.asp?t=294937&f=15&h=0

Again the gear shift you have the link of is a toyota lump model with 6 speed box.
But saying that you can get it to look the same.

You need:
short shift kit (would reccomend doing the linkages as well at the same time)
www.eliseparts.com/shop/index.php?main_page=product_info&cPath=93&products_id=254

Ant a leather gaitor which can be made at the hethel factory by mel broome.
www.bell-colvill.co.uk/LotusShop/Details.asp?Id=RETRIM_10

You obviously dont have to have the whole console leathered but i think it looks better.

Hope that helped. Probably confussed you more!

shangani

3,069 posts

268 months

Saturday 5th August 2006
quotequote all
A few quick points:

The wheels on that car are the same ones as fitted to the S2 111s, so the offsets would be exactly the same as your current rims. They would need to be converted to black as they came in a variety of silver finishes. You can use 111r wheels with a spacer, but why bother?

As for tyres, why do you want to run Yoko 048's? They are a rubbish road tyre for general use - horrid in standing water and you get about 5K out of a set which costs £650. They work best when warm, so better suited to the track. Also, the fronts are 195 profile which is very wide for the 5.5J front rim that you like the look of (from the picture). Ideally you should use a 6.6J or 7J front rim. They are also heavier than the OZ motorsport wheels.

Gearshift - the shortshifter shortens the throw and is a shorter lever in length. You can get a variety of gearknobs from lotus as well as a gearstick gaiter.

as400

Original Poster:

161 posts

243 months

Saturday 5th August 2006
quotequote all
Cheers Dave, not the best of news but I'm still learning what is and isn't possible!

shangani

3,069 posts

268 months

Saturday 5th August 2006
quotequote all
Oh, I should also add that you will need different suspension to exploit the added dry grip of yoko 048's. The springs on standard S2 suspension are so soft (relatively) that you will be bouncing off the bumpstops.

Get some 111s spider wheels with new tyres from Brooke Kensington for £600 and get them sprayed black.

To go the route you have described will cost plenty:

Rims £450 odd
Spray rims £100-£200
Yoko 048's £650
Suspension and geo £700 - 1300 (LSS or nitron)
r on standard S2 suspension and nitrons and have a fair bit of experience of the LSS suspension.
On LSS suspension, your ride quality will get massively worse (as it will on yoko 048's)

I speak from personal experience. I have standard 8 spoke spider rims with the standard bridgestonetyres and OZ rims with 048's (for track). I have run the car on both standard S2 suspension as well as nitrons and also have a fair bit of experience of driving on LSS suspension.

as400

Original Poster:

161 posts

243 months

Saturday 5th August 2006
quotequote all
Ah-ha...I'm learning fast here...yes this is all rather in aid of favourable aesthetics rather than practicalities though I do anticipate some track usage....having just bought (but not yet recieved) my anxiously anticipated vehicle I find myself pacing around the showroom ooing and arring over nice looking wheels and other ancillaries and envisage quickly adding them to my steed without understanding the underlaying possible technical complexities involved.

Thanks for your explaining to this over anxious simpleton!

shangani

3,069 posts

268 months

Saturday 5th August 2006
quotequote all
Seriously, save your money initially. Get some driver training through www.carlimits.com That is the best mod you will ever make to yourself or the car.

Keep posting, there are a number of really knowledgeable folks who will be happy to help at any point. From bitter experience, it is better to do the research than make an impulse purchase that you will end up regretting or having to undo.