A Frame Torque settings?

[AM400]

Anyone know what the torque wrench settings should be for the bolts on the A frames? and also the rear tie bars?

No mention of these in the bible but as with all suspension components I presume they will need to be torqued up once the weight of the car is on the road wheels.

Thanks
Andy

[FrenchTVR]

Left eye bulging and both testicles screaming


Seriously, they don't need to be silly tight, probably about 40lb/ft should be sufficient. IIRC on mine they are Nyloc nuts so no worries about them coming undone. If you are worried add a drop of Loctite nut-lock when re-assembling.

[AM400]

FrenchTVR said:

Left eye bulging and both testicles screaming


Seriously, they don't need to be silly tight, probably about 40lb/ft should be sufficient. IIRC on mine they are Nyloc nuts so no worries about them coming undone. If you are worried add a drop of Loctite nut-lock when re-assembling.

Cheers Mick, not too worried about them coming undone, its my abilty to overtighten that concerns me most!