Larini v Janspeed 4-2-1
Larini v Janspeed 4-2-1
Author
Discussion

heesen

Original Poster:

97 posts

243 months

Tuesday 15th August 2006
quotequote all
Looking at buying new manifold and flexi. Anyone got any suggestions which one to go for. Larini looks good and will supposedly fit without probs. Already have a loti sport silencer. Have heard the Larini will increase torque but not BHP.
Any comments would be appreciated

shangani

3,069 posts

268 months

Tuesday 15th August 2006
quotequote all
Neither. Larini is really difficult to fit, janspeed doesn't add a great deal of performance.

The two that will really add to the performance are the eliseparts one and the new piper solid manifold. The latter can be obtained from BteveB on Seloc. Both will off far greater performance gains than manifolds that include a flexi section.

Lotusnick S2

251 posts

261 months

Tuesday 15th August 2006
quotequote all
shangani said:
Neither. Larini is really difficult to fit, janspeed doesn't add a great deal of performance.

The two that will really add to the performance are the eliseparts one and the new piper solid manifold. The latter can be obtained from BteveB on Seloc. Both will off far greater performance gains than manifolds that include a flexi section.


Andrew

No offence, but all you do is quote SteveB that is selling the Piper.
Piper might be the best or might be not.
We have seen no real perfomance comparisons for either of the manifolds.

By the way if you have AC I think you have to go for a Janspeed.
And all manifolds are a bastard to fit because it is difficult to remove the std one with its rusted bolts

Nikos

shangani

3,069 posts

268 months

Tuesday 15th August 2006
quotequote all
Actually not quite.

Steve was honest enough to say that the eliseparts one was better than the piper when I wanted to buy a piper off him. There is a lot of technical sense to what he is saying about the flexi section robbing power if you look at the diameters.

The difficulty in fitting the larini is well known. The janspeed has 2 sizes, the large bore one only really being good for engines over 200 bhp according to janspeed.

Lotusnick S2

251 posts

261 months

Tuesday 15th August 2006
quotequote all
shangani said:
There is a lot of technical sense to what he is saying about the flexi section robbing power if you look at the diameters.


I would love to see something more than just theoretical talk about diameters.
What effect do they have in real life performance?

shangani

3,069 posts

268 months

Tuesday 15th August 2006
quotequote all
There are quite a few dyno plots before and after manifold changes. Uldis gained about 8 bhp and quite a bit more torque after some fettling with the manifold.

Lotusnick S2

251 posts

261 months

Tuesday 15th August 2006
quotequote all
shangani said:
There are quite a few dyno plots before and after manifold changes. Uldis gained about 8 bhp and quite a bit more torque after some fettling with the manifold.


Fair enough that they would offer some gains.
Especially on highly tuned engines.

But do we have data of how they affect our VVC?
The Janspeed (example) might be great for a highly tuned K but crap for mine.
Hope you get my point

shangani

3,069 posts

268 months

Tuesday 15th August 2006
quotequote all
Absolutely - which is why I will be fitting Maddogs old janspeed to my car along with a CR gearbox ASAP. Your car feels like it has bags more torque than mine. Even Fred was moaning that you catch him up on the straights even when you have a fat passenger (me). I could not keep up with fred down the straight at Silverstone BTW.

Lotusnick S2

251 posts

261 months

Tuesday 15th August 2006
quotequote all
shangani said:
Absolutely - which is why I will be fitting Maddogs old janspeed to my car along with a CR gearbox ASAP. Your car feels like it has bags more torque than mine. Even Fred was moaning that you catch him up on the straights even when you have a fat passenger (me). I could not keep up with fred down the straight at Silverstone BTW.




I agree that my car feels that it has more torque than other 111s's.
However there is a reason why it was so much faster than Fred's even with the weight of the extra passenger.
His throttle was not opening 100%

Can I drive your car after you fit the CR box?

shangani

3,069 posts

268 months

Tuesday 15th August 2006
quotequote all
Lotusnick S2 said:
Can I drive your car after you fit the CR box?


Are you completely nuts? Only joking - having done two trackdays sharing the car with a man called maddog the car should be ready for anything! You are welcome. I will keep you posted - will aim to do it next month.

peter450

1,650 posts

264 months

Tuesday 15th August 2006
quotequote all
shangani said:
Actually not quite.

Steve was honest enough to say that the eliseparts one was better than the piper when I wanted to buy a piper off him. There is a lot of technical sense to what he is saying about the flexi section robbing power if you look at the diameters.

The difficulty in fitting the larini is well known. The janspeed has 2 sizes, the large bore one only really being good for engines over 200 bhp according to janspeed.


second that i've seen loads of threads about larini's poor fiting on some cars, & its not just the elise, the exhaust they did for my excel didnt fit properly either

Lotusnick S2

251 posts

261 months

Tuesday 15th August 2006
quotequote all
shangani said:
Lotusnick S2 said:
Can I drive your car after you fit the CR box?


Are you completely nuts? Only joking - having done two trackdays sharing the car with a man called maddog the car should be ready for anything! You are welcome. I will keep you posted - will aim to do it next month.


Cheers mate

S works

10,166 posts

281 months

Wednesday 16th August 2006
quotequote all
If I remember correctly Nigel's (heesen) car is a standard S2 - if so then I would consider Steve's recommendation not unreasonable.

Given the well documented issues with the Larini, I'd be tempted to go Piper first and then Janspeed as a back-up if Piper not available.

Esprit

6,373 posts

314 months

Wednesday 16th August 2006
quotequote all
Don't know if it's an S2-specific problem but my Larini 4-2-1 fitted on like the proverbial glove when I did mine (S1), it was a HELL of lot easier going on than the OEM manifold was going off.... since doing it I've had rather impressive performance gains with it. While I've got no dyno plots to back it up I'm getting quicker quarter mile times and my terminal velocity down the back straight at pukekohe is now a good 10-15km/h faster. The car also revs much cleaner now.