Thought it was nearly impossible to stall a diesel?
Thought it was nearly impossible to stall a diesel?
Author
Discussion

wacattack

Original Poster:

576 posts

256 months

Friday 18th August 2006
quotequote all
My car is in JCT today getting the footwell corrosion problem fixed under warranty, so they gave me a BM 3 series M Diesel as a courtesy car, nice!!

On the trip from the garage to work i managed to stall the thing 3 times!! HOW?!?!

I am having to apply quite a few revs to avoid stalling the thing.

Also, I am not used to the servo assisted breaks so nearly through myself through the windscreen the first time I braked! It was like learning to drive again!

Me not like!

WWESTY

2,690 posts

269 months

Friday 18th August 2006
quotequote all


Its ok when you get used to it....but I know what you mean. It is a bit weird because conversely it will happily pull the thing along at tickover speed once up and running!!

DSS123

351 posts

267 months

Friday 18th August 2006
quotequote all
Yeh, my Focus is the same, doesn't like rolling away from junctions in 2nd. Stalls with a big bang!

Dunc

sneakypete

173 posts

260 months

Friday 18th August 2006
quotequote all
When I binned the Elise I had a Golf GT TDI for about three months.

Stalled all the time - just does not like low revs. I hated it.

mr_c

2,508 posts

260 months

Friday 18th August 2006
quotequote all
Diesels are rubbish

you don't need torque, you need power, and revs

jago

247 posts

250 months

Friday 18th August 2006
quotequote all
mr_c said:
Diesels are rubbish

you don't need torque, you need power, and revs


just don't mention that to the vvc committee

mr_c

2,508 posts

260 months

Friday 18th August 2006
quotequote all
yes but a VVC pulls all the way to the 7000rpm limiter.

piooly

1,176 posts

256 months

Friday 18th August 2006
quotequote all
my girlfreind has a desiel car and I stall it sometimes. I think its beacause on the elise you only have to breath on the accelerator for the engine to response where as on the desiel, it needs a firmer push.....

s111dpc

1,519 posts

260 months

Friday 18th August 2006
quotequote all
I owned the 150 bhp Bora TDI for 3 years and stalled it a lot in the early days. They don't like low revs in 2nd, especially pulling away at roundabouts etc. Bl**dy rapid when it was moving though.yes

gooby

9,269 posts

265 months

Saturday 19th August 2006
quotequote all
You got a BMW 3 for a courtesy car and I got a bog standard Punto. hurl

After I executed the tyres in thier alfa, I dont think they trust me with a nice car.

I nipped into summerfields (it is a "punto" kind of thing to do) some old dear was hovering by the car and insisted on telling me how she misses her old punto and wishes she hadnt pulled out infront of a Jag. I did my best to disguise the venom and hate I have in my voice when I talk about the bag-o-sh!te and nodded and smiled for the pre requsite time.

It really is an old ladies car. bleugh

MJK 24

5,679 posts

267 months

Saturday 19th August 2006
quotequote all
Some modern diesels have a very light flywheel.

The Ford TDCi can be ludicrously easy to stall if you don't 'think' when releasing the clutch. The VW's don't seem to be as bad. No experience of a modern BMW diesel.

TIPPER

2,955 posts

250 months

Saturday 19th August 2006
quotequote all
Never had that problem with our Audi A3 130 but agree with the comments re second gear. Very easy to catch them well off boost and no power entering roundabouts etc. You soon adapt though.
Funnily I often find myself stalling my (petrol) ZT. That car really needs revs to get it going and a good firm prod of the loud pedal to get some revs.