Uprated ECU chip
Uprated ECU chip
Author
Discussion

Monkey276

Original Poster:

30 posts

242 months

Sunday 20th August 2006
quotequote all
I have an uprated ECU chip and want to put the original chip back in. Problem is when i put the old chip in, the engine initially goes to start, then just seems to turn over without any sign that it might start. Seems like there is no fuel going in. Any ideas what to do?

Cider Andy

1,889 posts

255 months

Sunday 20th August 2006
quotequote all
Does the car then start when you refit the 'tuned' chip? If so, the original chip is either dead, or the bitmap stored in it is corrupt, or you've fitted it the wrong way round (the notch in the centre of one end of the chip must match a similar notch in the socket). Incidentally, if the chip has been fitted the wrong way round, it's now likely that it's destroyed.

Or as part of the upgrade other things were changed that mean the engine will no longer run along with those changes on the original chip.

May I ask why you're putting the original chip back in?

trackcar

6,453 posts

256 months

Sunday 20th August 2006
quotequote all
Is the tuned chip a mark adams chip? if so you'd need to remove the piggyback carrier it sits in aswell.

Monkey276

Original Poster:

30 posts

242 months

Sunday 20th August 2006
quotequote all
Definitly fitted the chip the right way around and car is fine when the modified chip is refitted. Putting the old chip back in because the car take nearly a minute to return to idle, hold at about 2000+ revs, then slovely drops back down. Plus have had cars with uprated chips before, alot more petrol burnt for not alot of extra power, so not a fan.

Monkey276

Original Poster:

30 posts

242 months

Sunday 20th August 2006
quotequote all
scratching my head for the name of the chip. All i can think of is there is a picture of a hodgehog on the chip label. sorry i can't be more specific at the moment.

vixpy1

42,699 posts

294 months

Sunday 20th August 2006
quotequote all
Er.. The Chim ECU only controls the fueling..

cre

168 posts

251 months

Sunday 20th August 2006
quotequote all
Monkey276 said:
scratching my head for the name of the chip. All i can think of is there is a picture of a hodgehog on the chip label. sorry i can't be more specific at the moment.


A "happy hedgehog" is the sign of an MA chip.

Jamie

GreenV8S

31,021 posts

314 months

Sunday 20th August 2006
quotequote all
Monkey276 said:
Definitly fitted the chip the right way around and car is fine when the modified chip is refitted. Putting the old chip back in because the car take nearly a minute to return to idle, hold at about 2000+ revs, then slovely drops back down. Plus have had cars with uprated chips before, alot more petrol burnt for not alot of extra power, so not a fan.


The chip wouldn't cause those symptoms, you probably have some other fault. Mark Adams chips don't just chuck extra fuel in, they improve driveability and typically improve the economy too. There's really no good reason to remove it.

Griffter

4,143 posts

285 months

Monday 21st August 2006
quotequote all
GreenV8S said:

The chip wouldn't cause those symptoms, you probably have some other fault. Mark Adams chips don't just chuck extra fuel in, they improve driveability and typically improve the economy too. There's really no good reason to remove it.


With all due respect (cos I know you know more than I know) I beg to differ. Since refitting an original chip to my car, occasional stalling or high revving at coast/idle no longer occurs. In general the car behaves more consistenly and feels 100% again.

When changing the chip DO NOT touch the chip legs. Preferably don't even touch the chip at all - use plastic tweezers, or a clothes peg. An anti-static bag used as a 'glove' is another possibility. If you have fooked the chip, replacements are available from TVR Power.