Help - Fuses and Relays - Lights Failed

[ianw]

Hi Guys,

Anyone got a picture of which fuses or relays run the indicators lights, as all mine gave up last night or is it a matter of swapping them in and out until they work to find which one.

Thanks

Ian

[GTO400]

Picture and details are in your owners manual page 29, fuse 13 10amp.

[joolski]

If you find that the lights fail to come back on after the fuse change check the connector blocks which connect the lights to the main wiring loom.

If water gets into the blocks then the lights can fail, and blow fuses etc.

Best thing to do is disconnect the blocks and have a look at the connectors, if they are green, the will need to be cleaned (I use a terminal brush).

Also, use some silocone sealant to seal the connector blocks afterward.

--Jools

[ianw]

Cable to rear lights melted on exhaust !......fixed and just returned from a great evening on silverstone GP..... any of you guys in the yellow m12 53 plate?

Edited by ianw on Thursday 24th August 23:17