Handbrake Light when Turning hard or Accelerating hard
Discussion
Yeap brake fluid.... had this happen to me on track at Taupo around the hairpin... just kept on catching the light out of the corner of my eye, but couldn't see which one it wa... kept CRAPPING myself as I was sure it was the oil light and that I was getting oil surge, but it turns out that it was the brake fluid.
In the end you generally have to overfill the brake reservoir to stop this from happening, it just means that when you fit new pads you'll probably have tobleed a bunch of fluid out first to stop your reservoir overflowing all through your front service compartment.
In the end you generally have to overfill the brake reservoir to stop this from happening, it just means that when you fit new pads you'll probably have tobleed a bunch of fluid out first to stop your reservoir overflowing all through your front service compartment.
cuzza said:
If your brake fluid is getting that low then you might like to get your pads checked too. The systems are designed so that when you have new pads, you fill it to the max mark and as the pads wear it drops and the light comes on when you're low on pad.
And check for fluid leaks!!!
If you have no idea how to check your brake fluid, you really have no place being on the road, let alone in a high performance car like a Lotus! 
Don't think anyone's trying to start a row - brakes are kind of important though.
If you've had new pads I would expect they'd have don the fluid too (who did it?) - it tells you in the manual how to check the fluid and it's something you should keep an eye on as part of regular checks (oil level etc.)
Basically the header tank is in the front service compartment against the bulkhead on the drivers side and has a white screw top on it. IIRC the fluid level sensor plug is on the top of the cap - it could just be a dodgy connection on that so check there too.
If the fluid has been topped up and has now gone down a lot, you have a problem. It could be something as simple as a loose bleed nipple.
If you've had new pads I would expect they'd have don the fluid too (who did it?) - it tells you in the manual how to check the fluid and it's something you should keep an eye on as part of regular checks (oil level etc.)
Basically the header tank is in the front service compartment against the bulkhead on the drivers side and has a white screw top on it. IIRC the fluid level sensor plug is on the top of the cap - it could just be a dodgy connection on that so check there too.
If the fluid has been topped up and has now gone down a lot, you have a problem. It could be something as simple as a loose bleed nipple.
If they didn't take the front panel off when replacing the pads, they are a bunch of cowboys who deserve a serious bollocking. Don't take your car to them again!
I won't bore you with the details of why, but you need to check the level of fluid in the reservoir and if necessary remove some, before fitting new pads, then you need to top up the reservoir to the correct level again when you have finished.
I won't bore you with the details of why, but you need to check the level of fluid in the reservoir and if necessary remove some, before fitting new pads, then you need to top up the reservoir to the correct level again when you have finished.
Sam_68 said:
If they didn't take the front panel off when replacing the pads, they are a bunch of cowboys who deserve a serious bollocking. Don't take your car to them again!
I won't bore you with the details of why, but you need to check the level of fluid in the reservoir and if necessary remove some, before fitting new pads, then you need to top up the reservoir to the correct level again when you have finished.
I won't bore you with the details of why, but you need to check the level of fluid in the reservoir and if necessary remove some, before fitting new pads, then you need to top up the reservoir to the correct level again when you have finished.
Yep, ding to that
Pushing the brake calliper pistons back in again before fitting new pads 'may well' have been enough to raise the reservoir level, but surely it's best practice to take the top off to ease that movement..? In any case, not checking & re-checking level is bloody poor form
Just to add to the original post - as said here already, the light is definitely fluid warning light. My 06 model does it too and after only 5000 miles of not excessively hard use. I hear the OEM pads are 'made of cheese'. A slightly different flavour of pad may be finding it's way in there next time
Gassing Station | Elise/Exige/Europa/340R | Top of Page | What's New | My Stuff



