No temperature?
Discussion
Check the wire to the temp sender wasn't pulled off during the service.
If it's a K series then the temp sender is on the large bore plumbing at the nearside end of the engine.
There are 2 senders, one for the ECU, the other for the gauge, they sit at right angles to each other, forget which is which, but it will be obvious if the wire is off.
If it's a K series then the temp sender is on the large bore plumbing at the nearside end of the engine.
There are 2 senders, one for the ECU, the other for the gauge, they sit at right angles to each other, forget which is which, but it will be obvious if the wire is off.
Gassing Station | Elise/Exige/Europa/340R | Top of Page | What's New | My Stuff


