Ancillary requirements
Discussion
Hello boys and girls...
I have a standard S1, to which I have added an induction kit and removed the cat (well, it's being removed as I type - can't wait to pick it up!)
My question, bear in mind that I am no mechanic, is - what with the air getting in better, and the exhaust gases getting out better, is there anything else I should also do to maximise the effects of these alterations?
Thanks in advance all!
I have a standard S1, to which I have added an induction kit and removed the cat (well, it's being removed as I type - can't wait to pick it up!)
My question, bear in mind that I am no mechanic, is - what with the air getting in better, and the exhaust gases getting out better, is there anything else I should also do to maximise the effects of these alterations?
Thanks in advance all!
Edited by jaykaybi on Friday 1st September 12:58
Great stuff, but I'm a complete novice when it comes to this sort of thing, which explains why I ask quite a lot of these questions.
I get what an ecu is, but not how much it would cost, and how i should program it... also how does one go about putting cams in? And what exactly do they do? How much do they cost? How much difference do they make?
etc etc.
my point being 'I am a dumbass' when it comes to this sort of thing and need everything spelled out, sorry! (Hey, my heart's in the right place and I want to learn!)
I get what an ecu is, but not how much it would cost, and how i should program it... also how does one go about putting cams in? And what exactly do they do? How much do they cost? How much difference do they make?
etc etc.
my point being 'I am a dumbass' when it comes to this sort of thing and need everything spelled out, sorry! (Hey, my heart's in the right place and I want to learn!)
Edited by jaykaybi on Friday 1st September 13:37
It'd be best to get them fitted by someone who knows what theyre doing and can time the verniers so that you're getting the best from them. you could make a right mess of it yourself. ECU is best left to a pro aswell. You might need the head porting and polishing to get the best from it all though.
*as you may have gathered, i don't really do much on my car, i'd rather pay someone who knows what they're doing*
*as you may have gathered, i don't really do much on my car, i'd rather pay someone who knows what they're doing*
Personally I would leave the engine standard unless you have a really good reason to change. If you go on track and want to go faster, I would do things in this order:
1) Driver training
2) Suspension
3) Sticky tyres
4) Lighten the car
5) Now maybe consider more power
I have a properly sorted car in terms of handling, but have left the engine standard. I can keep up with most things on road and track. You will run the risk of making you engine unreliable by tinkering with the innards. The car in standard form is extremely quick if driven well.
1) Driver training
2) Suspension
3) Sticky tyres
4) Lighten the car
5) Now maybe consider more power
I have a properly sorted car in terms of handling, but have left the engine standard. I can keep up with most things on road and track. You will run the risk of making you engine unreliable by tinkering with the innards. The car in standard form is extremely quick if driven well.
Ditto what Shangers said. After being of the same mind as you before my first trackday, I have now changed my mind as to what makes a car go faster. First and foremost has to be driver training, Id probably then swap 2,3 and 4 in his list around a bit (just to be awkward) and then add the power.
Having the power but not the means of delivering it to the track/road is a real waste of money.
Having the power but not the means of delivering it to the track/road is a real waste of money.
My comments were based on lond and at times bitter experience. I don't see much way around the order.
2) Suspension - running on knackered koni's does nothing to handling and in any event, you can't exploit sticky tyres before getting compatible suspension.
3) Tyres - makes a great difference on track, but only if the suspension can handle it. You would need uprated toe links to run sticky tyres on an S1. No point going for 3 till 2 is sorted.
4) Lighten the car - he has an S1, so not a lot you can easily chop. This gets more costly than you think. Lightweight exhaust, carpets out etc and maybe light battery if you are really pedantic. After that it gets really expensive.
If you want a powerful car that handles like it is on castors, get an old TVR.
2) Suspension - running on knackered koni's does nothing to handling and in any event, you can't exploit sticky tyres before getting compatible suspension.
3) Tyres - makes a great difference on track, but only if the suspension can handle it. You would need uprated toe links to run sticky tyres on an S1. No point going for 3 till 2 is sorted.
4) Lighten the car - he has an S1, so not a lot you can easily chop. This gets more costly than you think. Lightweight exhaust, carpets out etc and maybe light battery if you are really pedantic. After that it gets really expensive.
If you want a powerful car that handles like it is on castors, get an old TVR.
Indeed.
I've got (fairly) sticky tyres sorted, unfortunately the S2 suspension upgrade fell through due to lack of availability of parts, and I can't really afford a Nitron/Ohlin kit right now.
I'm 99% likely to heading off to see Mr. Walsh sometime very soon based on a number of people's recommendations (and because I've already pretty much memorised his DVD Bending the Rules).
What I was really wondering was 'have I maximised the effect of the mods I've already made,' as I certainly don't plan on spending big bucks on overhauling the engine.
I'm curious as to how one goes about lightening an elise...? (Edited to say - 'ah, I see')
I've got (fairly) sticky tyres sorted, unfortunately the S2 suspension upgrade fell through due to lack of availability of parts, and I can't really afford a Nitron/Ohlin kit right now.
I'm 99% likely to heading off to see Mr. Walsh sometime very soon based on a number of people's recommendations (and because I've already pretty much memorised his DVD Bending the Rules).
What I was really wondering was 'have I maximised the effect of the mods I've already made,' as I certainly don't plan on spending big bucks on overhauling the engine.
I'm curious as to how one goes about lightening an elise...? (Edited to say - 'ah, I see')
Edited by jaykaybi on Friday 1st September 15:36
BTW just picked up the car. The silly buggers had it in the showroom. Tut tut. I may not have been very restrained when I first started it up in the large, hangar style building.
I nearly shat myself laughing when I gave it a little prod!
De-cat = good investment, very many smiles per £!
I nearly shat myself laughing when I gave it a little prod!
De-cat = good investment, very many smiles per £!
crackthatoff said:
read yesterdays review on tesco's 99 fuel they recon it's good for a 10% power increase ?! 

Intersting you say that, fuel ratings were also on my mind. Maybe I should be more specific -
Now that I have an induction kit and de-cat, and assuming I use only the fancy stuff, what can I do to optimise my car's performance for this set-up without making major mechanical mods?
What can I expect a programable ECU to do?
Afternoon,
Just echoeing what the others have said above, im in need of some driver training also which i have been recommended to by many other Loti enthusiasts. But if you really want to alter your car i'd speak to someone that knows what their talking about. I always go to Greg at Hanger 111 for advice.
Just echoeing what the others have said above, im in need of some driver training also which i have been recommended to by many other Loti enthusiasts. But if you really want to alter your car i'd speak to someone that knows what their talking about. I always go to Greg at Hanger 111 for advice.
shangani said:
2) Suspension - running on knackered koni's does nothing to handling and in any event, you can't exploit sticky tyres before getting compatible suspension.
Does exige standard suspension come under the heading of "compatible" or does this only mean adjustable suspension? shangani said:
4) Lighten the car
I was thinking more of putting this up top of my personal list since I've got a 111r - maybe go on a diet myself too
I did say I'd just shuffle them round to be awkward

simonk said:
stiffer plus ride height adjustable
ahh right - so how do you find out how to adjust it?? This is assuming that I've not been told porky pies and the suspension on the SR really is the same as standard exige! Know what you mean about it though Simon I get headaches from the suspension on the rough roads round here, but the photos from Monday show it rolling far too much
grinzzz said:
simonk said:
stiffer plus ride height adjustable
ahh right - so how do you find out how to adjust it?? This is assuming that I've not been told porky pies and the suspension on the SR really is the same as standard exige! Know what you mean about it though Simon I get headaches from the suspension on the rough roads round here, but the photos from Monday show it rolling far too much
Standard exige suspension is non- adjustable
gooby said:
grinzzz said:
simonk said:
stiffer plus ride height adjustable
ahh right - so how do you find out how to adjust it?? This is assuming that I've not been told porky pies and the suspension on the SR really is the same as standard exige! Know what you mean about it though Simon I get headaches from the suspension on the rough roads round here, but the photos from Monday show it rolling far too much
Standard exige suspension is non- adjustable
The ride height on std exige suspension is adjustable. My understanding is that this is a dealer only type job probably best as part of a geo.
To be clear the damping compression/rebound is not adjustable. This is what you can adjust with nitrons etc.
Simon
gooby said:
grinzzz said:
simonk said:
stiffer plus ride height adjustable
ahh right - so how do you find out how to adjust it?? This is assuming that I've not been told porky pies and the suspension on the SR really is the same as standard exige! Know what you mean about it though Simon I get headaches from the suspension on the rough roads round here, but the photos from Monday show it rolling far too much
Standard exige suspension is non- adjustable
ok - im andy@bloodyconfused.com now! Must admit I didnt think it was otherwise I'd have been under the car by now!
Lotus webby for the SR..he says "Sport suspension (non-adjustable dampers and ride height)" so I guess that means they are not adjustable (and Simon has enough money for the super sport pack
) Edited by grinzzz on Friday 1st September 17:38
Edited by grinzzz on Friday 1st September 17:40
My understanding is as follows:
Std exige suspension can have the ride height changed together with the other various geo settings of toe/caster etc. The damping cannot be adjusted tho.
You can then trade up to nitrons/ohlins etc where you can yourself adjust the damping compression & rebound. The supersport pack includes some bilstein dampers which are adjustable "one-way" like the nitrons.
I dont have supersport pack (altho am getting there slowly!), but i have junked my std suspension for the springs and dampers the supersport cars come with.
HTH - if not then you need someone with better understanding than me!
Simon
Std exige suspension can have the ride height changed together with the other various geo settings of toe/caster etc. The damping cannot be adjusted tho.
You can then trade up to nitrons/ohlins etc where you can yourself adjust the damping compression & rebound. The supersport pack includes some bilstein dampers which are adjustable "one-way" like the nitrons.
I dont have supersport pack (altho am getting there slowly!), but i have junked my std suspension for the springs and dampers the supersport cars come with.
HTH - if not then you need someone with better understanding than me!
Simon
Gassing Station | Elise/Exige/Europa/340R | Top of Page | What's New | My Stuff




