fault code 26
fault code 26
Author
Discussion

custarddog

Original Poster:

22 posts

243 months

Monday 4th September 2006
quotequote all
just popped a code reader on the chim and got code 26
cant find anything out about the code

got any ideas?

tvrbubblecar

306 posts

268 months

Monday 4th September 2006
quotequote all
There is something about 26 in this thread

www.pistonheads.com/gassing/topic.asp?t=196780&f=8&h=0&hw=fault+codes

Hope you get it sorted - what are the symptoms of your problem or were you just seeing what the reader gives

cheers
Chris

custarddog

Original Poster:

22 posts

243 months

Monday 4th September 2006
quotequote all
cheers bubblecar

getting a crakking flatspot/ missfire at just under 3k revs in all gears

dropped a lambda sensor out - looks like its running weak - so the code 26 would make sense after reading that post - but looking in the tail pipes there is a lot of soot and looks like its running rich? sparkplug colour looks good!


just been out in it for a little run around after doing a ecu reset- no fault codes showing got the flat spot back after around 4 miles



tvrbubblecar

306 posts

268 months

Monday 4th September 2006
quotequote all
I'm not an expert on this subject but I was told with unleaded fuel you can't tell about rich running from the colour of the exhaust pipes - its not like the old days when black was rich and white was lean - guess the plugs are a good guide