Track Day Noise Limit
Track Day Noise Limit
Author
Discussion

edswales

Original Poster:

43 posts

250 months

Tuesday 5th September 2006
quotequote all
I want to take my S2 Exige with Stage 2 exhaust on a track day. Do any of you know the noise level of this car and whether there are any garages in the London area where I can get its Db levels tested? I don't want to book a day and be disappointed when I get there.
Cheers, Ed

boggy

4,603 posts

266 months

Tuesday 5th September 2006
quotequote all
Hi,

I had a stage two fitted and they never knocked me back (Brand's Hatch)

Boggy

bjc388

459 posts

255 months

Tuesday 5th September 2006
quotequote all
Stage 2 is rated at 104db so a bit too loud for some circuits.

You can either get your own noise meter and test or better still book a noise test at a local circuit to get a more representative reading.

IIRC, they only ever test religously at Bedford - not at Brands or Snetterton. Some of the others that have been to more circuits can perhaps help ... ...

cuzza

2,042 posts

284 months

Tuesday 5th September 2006
quotequote all
All depends where you're going. Goodwood and Bedford are the strictest for noise AFAIK, Goodwood is 98 static and everyone gets tested before going on track. A lot of places e.g. Donington have a limit but will only pull you in if you trip the meters (this can happen very easily if you go past very close to another car).

If you really want a noise test done, go to a track day and talk nicely to the marshals. Make sure the everything is nice and hot as this can help the readings and increase the revs very slowly.

Other options are to get a nose marshall to visit you and do a test but this costs money (there are details for it in the MSA blue book IIRC) or hire a meter - I think Bookatrack used to do this (might be imagining that)

Edited by cuzza on Tuesday 5th September 13:54

speedyellow

2,533 posts

258 months

Tuesday 5th September 2006
quotequote all
Check with the organiser what the limits of the day are 101db and above I managed with a stage 2 no problem but anything less you stand a good chance of getting booted off.

Where are you going and I'll try and give you a guide just how strict they really are (who is organising the day always makes a difference as well).

edswales

Original Poster:

43 posts

250 months

Tuesday 5th September 2006
quotequote all
I was looking to go either to Bedford (a bit more run-off as it is my first track day) or to Castle Coombe as there seems to be more availability on weekends. I heard that bedford does on-track tests whereas Castle Coombe only tests prior to entering the course.

simonk

908 posts

256 months

Tuesday 5th September 2006
quotequote all
Stage 2 is going to be VERY marginal at Bedford. Someone with an S2 exige and stage 2 was kicked off for noise at easter when i was there.

They are happy to point out the noise meters though so you can short shift and keep away from other cars as you go past them.

I do think the circuit is fantastic for a beginner tho; did my first 3 or 4 trackdays there.

Simon

speedyellow

2,533 posts

258 months

Tuesday 5th September 2006
quotequote all
I'd say you have an 80% chance of not being able to drive Bedford with a stage 2 and almost 100% that you'll not make it onto Coombe (which is definately not a place I'd really recommend as a first track as there is plenty to hit there, but drive within your limits and it's not a problem....).

edswales

Original Poster:

43 posts

250 months

Tuesday 5th September 2006
quotequote all
Ok cheers. Given my experience and exhaust - what tracks would you recommend? Is it worth getting the standard exhaust fitted specially - I expect that is not cost effective.

simonk

908 posts

256 months

Tuesday 5th September 2006
quotequote all
Hmmmmm personally i rate bedford as head and shoulders above anything else ive done as a place for a first trackday.

Another option is an airfield track where there will only be cones to hit.

Or something else thats recent is the "novice" days where you spend time learning the theory and then being driven round before being let loose yourself. A couple of people on here did one at brands recently and found it very useful i believe. Im sure someone who has been can give you more details and opinion.

HTH

Simon

S works

10,166 posts

281 months

Tuesday 5th September 2006
quotequote all
With a stage 2 you should be OK at Brands. Was on a TD there with a chap in a 111R with one and he had no issues. @ Bedford you'll be in the lap of the gods.

duggan

950 posts

279 months

Wednesday 6th September 2006
quotequote all
Ed - I had people telling me that I wouldn't pass the static test at Bedford - I took a gamble went along and had no problem all day (the bank holiday saturday just gone)

edswales

Original Poster:

43 posts

250 months

Wednesday 6th September 2006
quotequote all
Cheers for that. I'll look to get something booked. Hopefully luck will be on my side too.

GirlyLotus_tamer

549 posts

243 months

Wednesday 6th September 2006
quotequote all
I was at Castle Coombe about a month ago and they do check your car once before you go on. Mine is an Elise 160bhp and it came in at 86db after being asked to rev the engine and hold at 4k revs which was fine. The only other tip and maybe I shouldn’t post this but we were given some friendly advice from a member of staff that as the Marshall it at the back of the car when taking the reading you could rev it to something lower therefore giving a lower reading.

I hope I am not going to get told off for posting that.

philygumbo

1,500 posts

280 months

Wednesday 6th September 2006
quotequote all
GirlyLotus_tamer said:
I was at Castle Coombe about a month ago and they do check your car once before you go on. Mine is an Elise 160bhp and it came in at 86db after being asked to rev the engine and hold at 4k revs which was fine. The only other tip and maybe I shouldn’t post this but we were given some friendly advice from a member of staff that as the Marshall it at the back of the car when taking the reading you could rev it to something lower therefore giving a lower reading.

I hope I am not going to get told off for posting that.


Most tracks have someone looking in to see the revs while they measure.