Help needed on s2 111s possible major engine fault :(
Discussion
Hi Guys and Gals,
Was on my way home tonight when my 2003 s2 111s started to splutter as if it was being starved of fuel so i pulled over and swithced the engine off.
There seemed to be a burning smell coming from the exhaust.
Had a quick look around the engine bay for obvious things but in the dark was difficult.
No signs of HGF
Oil level ok and not contaminated or burnt
Fuel gauge was showing 2 bars but when i shook the car i couldnt hear any signs of sloshing fuel at all. All that could be heard was air pumping up and down the neck of the filler as it was rocked. So i filled up with a can of fuel and tried to start. Was a bit wary about starting as i realise i could be doing more damage but with not hearing fuel it sounded the best step.
I crancked her over and it started but sounded very rough as if it was firing on 2 cylinders then cut out after a coule of seconds if left to idle by its self. I tried this a couple of times but to no avail. I could hear the injectors blasting fuel through and when switched off i could also smell the unburnt fuel in the exhaust.
I did today before the drive take off the throttle body as i was going to fit a 56mm version but once i got it off i realise there was more modifing to be done than what i wanted to do so i just put her back together. I did adjust the idle air control screw on the throttle body. Dont ask why, i just wanted to have a play.
I only mention that incase it is of any relevence to anyone.
Ive had no previous problems to date other than about 2 weeks ago i had a noise coming from the engine as if there was a dry bearing, like a train. Only happend a couple of times and only from cold. I read a few forums and put this down to the vvc being drained of oil because it had been sitting a few days. It seemed to be a common topic on the rover forums etc:
There are a couple of things i am thinking it could be but im probably wrong:
-Possibly jumped a tooth and timing is out?
-Faulty alternator? Would that explain the burning smell? Maybe not the rough idle though?
Im pretty lost as to what to do next with it.
I was going to drop the spark plugs out and have a look at those.
Ill be honest im really not in the possition financially at the moment to be sending it to Lotus or a specialist but if thats what it takes then not a lot i can do. Im just worried of the costs. Ive been here bofore with my Esprit.
I do have Horizon Motorsport about 10 miles from me and Nick Whale Bromsgrove about 15 miles from me.
If it has to go somewere im unsure where to go. My head is telling me Nick Whale as if it is a major problem and i need to get onto lotus about it then at least it is in the right place. It just coming up to 10k miles. On the other hand £££££££££££
Help would be much apreciated.
Ill return the favor anyway i can in the future.
Thanks
Dave
07764 478534
Was on my way home tonight when my 2003 s2 111s started to splutter as if it was being starved of fuel so i pulled over and swithced the engine off.
There seemed to be a burning smell coming from the exhaust.
Had a quick look around the engine bay for obvious things but in the dark was difficult.
No signs of HGF
Oil level ok and not contaminated or burnt
Fuel gauge was showing 2 bars but when i shook the car i couldnt hear any signs of sloshing fuel at all. All that could be heard was air pumping up and down the neck of the filler as it was rocked. So i filled up with a can of fuel and tried to start. Was a bit wary about starting as i realise i could be doing more damage but with not hearing fuel it sounded the best step.
I crancked her over and it started but sounded very rough as if it was firing on 2 cylinders then cut out after a coule of seconds if left to idle by its self. I tried this a couple of times but to no avail. I could hear the injectors blasting fuel through and when switched off i could also smell the unburnt fuel in the exhaust.
I did today before the drive take off the throttle body as i was going to fit a 56mm version but once i got it off i realise there was more modifing to be done than what i wanted to do so i just put her back together. I did adjust the idle air control screw on the throttle body. Dont ask why, i just wanted to have a play.
I only mention that incase it is of any relevence to anyone.
Ive had no previous problems to date other than about 2 weeks ago i had a noise coming from the engine as if there was a dry bearing, like a train. Only happend a couple of times and only from cold. I read a few forums and put this down to the vvc being drained of oil because it had been sitting a few days. It seemed to be a common topic on the rover forums etc:
There are a couple of things i am thinking it could be but im probably wrong:
-Possibly jumped a tooth and timing is out?
-Faulty alternator? Would that explain the burning smell? Maybe not the rough idle though?
Im pretty lost as to what to do next with it.
I was going to drop the spark plugs out and have a look at those.
Ill be honest im really not in the possition financially at the moment to be sending it to Lotus or a specialist but if thats what it takes then not a lot i can do. Im just worried of the costs. Ive been here bofore with my Esprit.
I do have Horizon Motorsport about 10 miles from me and Nick Whale Bromsgrove about 15 miles from me.
If it has to go somewere im unsure where to go. My head is telling me Nick Whale as if it is a major problem and i need to get onto lotus about it then at least it is in the right place. It just coming up to 10k miles. On the other hand £££££££££££
Help would be much apreciated.
Ill return the favor anyway i can in the future.
Thanks
Dave
07764 478534
Edited by Dave_s2_111s on Wednesday 6th September 00:32
In your position I'd start by removing the throttle body again.
Check any connections, bolts and seals are all ok, then replace.
Although there is a chance it is something else, likelyhood is that the process of removing the TB has caused your problems, it's too much of a coincidence.
Check any connections, bolts and seals are all ok, then replace.
Although there is a chance it is something else, likelyhood is that the process of removing the TB has caused your problems, it's too much of a coincidence.
I have used Horizon before and know Mike farley well but dont like to disturb unless i have to.
Right so heres whats happened.
iI reset the IAC valve with the throttle adjustment screw in its original position as suggested.
I throughly check for any pipes off, leaks, connectors off etc and removed the cam cover to check spark plugs.
The spark plugs seemed fine, a little black/carbonised but i would say they looked normal considering they have been in from day 1.
I didnt realise they had changed the k-series to ignition packs. I prsumed it was still dizzy and rotor arm. Maybe im a bit old school.
Then wen on to check if each plug was firing and it did seem at the time that i had one lead that wasnt firing so i checked that the voltage was getting to the coil pack. I could only get 6 volts on the one pack of which i think should be 12v. So i switched the 2 coil packs over and it still didnt seem to fire so i thought i had a faulty coil back. But then after trying different formations and checks they were all firing.
I noticed at theis point when i was cranking the engine it seemed to be running smoother each time. Even with only 3 plugs coinnected. There was what looked to be water coming out of the exhaust. A little more than condensation but to be honest ive got a stinking cold at the moment so it could have been a bit of unburnt fuel mixed with condensation.
Decided to put her back together to try it out.
Hey presto she kicked into life after a bit of a throaty start and has run fine since.
Funny you should ask about it raining. It wasnt when i broke down but it has been sitting over the weekend outside and it absolutley hammered it down. In fact i have what looks to be a major leak in my boot because i had 3 giant dust sheets in there and they were sopping wet and slightly mouldy. Has anyone experienced this before?
Ive just drove her for a goot 20 mins taking it steady and she had one moment when on tick over it was a little spluttery but other than that its been as sweete as a nut.
Only time will answer this question but has me resetting the IAC valve and throttle adjustment screw?
Or did it get water in somewere where it didnt like??
Or finally have i just disturbed the fault and it will come back to haunt me???
If its the latter im pretty convinced now its electrical and not mechanical which is a big relief.
Still no MIL light at any point. Even when id got it firing on 2 cylinders.
Anyway im just keeping my fingers crossed that i have sorted the problem.
Massive relief and thanks for all the input.
Dave
Right so heres whats happened.
iI reset the IAC valve with the throttle adjustment screw in its original position as suggested.
I throughly check for any pipes off, leaks, connectors off etc and removed the cam cover to check spark plugs.
The spark plugs seemed fine, a little black/carbonised but i would say they looked normal considering they have been in from day 1.
I didnt realise they had changed the k-series to ignition packs. I prsumed it was still dizzy and rotor arm. Maybe im a bit old school.
Then wen on to check if each plug was firing and it did seem at the time that i had one lead that wasnt firing so i checked that the voltage was getting to the coil pack. I could only get 6 volts on the one pack of which i think should be 12v. So i switched the 2 coil packs over and it still didnt seem to fire so i thought i had a faulty coil back. But then after trying different formations and checks they were all firing.
I noticed at theis point when i was cranking the engine it seemed to be running smoother each time. Even with only 3 plugs coinnected. There was what looked to be water coming out of the exhaust. A little more than condensation but to be honest ive got a stinking cold at the moment so it could have been a bit of unburnt fuel mixed with condensation.
Decided to put her back together to try it out.
Hey presto she kicked into life after a bit of a throaty start and has run fine since.
Funny you should ask about it raining. It wasnt when i broke down but it has been sitting over the weekend outside and it absolutley hammered it down. In fact i have what looks to be a major leak in my boot because i had 3 giant dust sheets in there and they were sopping wet and slightly mouldy. Has anyone experienced this before?
Ive just drove her for a goot 20 mins taking it steady and she had one moment when on tick over it was a little spluttery but other than that its been as sweete as a nut.
Only time will answer this question but has me resetting the IAC valve and throttle adjustment screw?
Or did it get water in somewere where it didnt like??
Or finally have i just disturbed the fault and it will come back to haunt me???
If its the latter im pretty convinced now its electrical and not mechanical which is a big relief.
Still no MIL light at any point. Even when id got it firing on 2 cylinders.
Anyway im just keeping my fingers crossed that i have sorted the problem.
Massive relief and thanks for all the input.
Dave
One thing ive just thought of that some may be able to answer.
On the ignition leads all of them have metal caps on the end of the lead inside the silicone bung (if that makes sense) that clips over the spark plug. Normal procedure. But the one doesnt have one, there is just the spring in the end with no metal cap. I wondered if that could have been my problem. Both ignition have the same numbers on them. Infact as i say i canged them over so if they had have been different im sure it would have thrown up another fault.
There was no cap sittiong ontop of the spark plug though so either it is normal or it hasnt had one on from new.
Would be greatfull if someone could confirm this for me.
Cheers
Dave
On the ignition leads all of them have metal caps on the end of the lead inside the silicone bung (if that makes sense) that clips over the spark plug. Normal procedure. But the one doesnt have one, there is just the spring in the end with no metal cap. I wondered if that could have been my problem. Both ignition have the same numbers on them. Infact as i say i canged them over so if they had have been different im sure it would have thrown up another fault.
There was no cap sittiong ontop of the spark plug though so either it is normal or it hasnt had one on from new.
Would be greatfull if someone could confirm this for me.
Cheers
Dave
Gassing Station | Elise/Exige/Europa/340R | Top of Page | What's New | My Stuff


