Mark Adams eBay shop
Discussion
Mark Adams seems to have a fantastic reputation so I cannot see you going wrong really, especially at that price!
The ad is quite confusing as it talks about getting the AFM, Injectors and Chip and then talks in the text about standard injectors and raising fuel pressure? I assume it is just a generic ad for all.
The ad is quite confusing as it talks about getting the AFM, Injectors and Chip and then talks in the text about standard injectors and raising fuel pressure? I assume it is just a generic ad for all.
I've just been having a look around and you can get a MA chip, personally custom to your car, advertised for £350! I'm assuming you'll have the cost of the rolling road and labour on top of that...
...can anyone out there confirm/deny this?
Rich
...can anyone out there confirm/deny this?
Rich
Edited by Woody_450 on Tuesday 12th September 07:40
i have just had a chip fitted to my 4.0 mark fitted it with rolling road setup
£350 chip £55per hour mark £75 per hour rolling road i was there three hours (new injectors fitted)
best ££££ ive spent so far, but on rolling road mark checked compresion and strength of engine before even running it on road
well pleased with end result
£350 chip £55per hour mark £75 per hour rolling road i was there three hours (new injectors fitted)
best ££££ ive spent so far, but on rolling road mark checked compresion and strength of engine before even running it on road
well pleased with end result
Steve_T said:
The ECU chips for sale contain a generic map from the looks of it, so this will be an improvement over standard, but not as much of an improvement as you'd get from a custom map specific to your car.
Steve.
Steve.
Yeah my thoughts exactly, for £417 I can get a chip delivered with a generic mapping generated from all the chips MA has created from years of tuning OR I could travel a fair few 100 miles down the M1 from Yorkshire pay £350 plus £165 to £200 (labour/RR) plus parts (if needed) for a custom map and a good fettling of the engine.
Oh why does life bring such difficult questions?!?
I think it's eBay time...
Rich
TVRThomo said:
Just out of interest did you get the chip individually setup on the RR for you car or did you just plug the chip in ?
I bought it from eBay so it's just a plug 'n go. But I need to get greasy at do a bit of fettling under the bonnet, clean and gap the plugs, dizzy, rotor arm etc. I also need to dust off the strobe timing light and check the static timing.
I've also got a MagnaParva t-spacer to fit too, so I think I'll take it to the RR to get everything set up spot on when it's all done
Didn't get chance tonight to take it for a spin
but I'm sure it just sounds better when I started it up after fitting the chip (maybe that's just me)
Rich
Gassing Station | Chimaera | Top of Page | What's New | My Stuff




