Removing front indicator lenses.
Discussion
Anyone any experience with removing the orange military style indicator lenses on a Mk1 Chimaera? Checked the bible and previous threads but with no luck. Want to change to the clear style but the old ones dont want to go! Appear to be held on with some kind of sealant but not sure how to free them?
I'm not sure if they're the same as Griff indicators, but if so, see the following thread:-
www.pistonheads.com/gassing/topic.asp?t=305674&f=9&h=0
www.pistonheads.com/gassing/topic.asp?t=305674&f=9&h=0
I did this earlier in the year, i found removing the whole unit ie grill gause and lense worked best, then cutting the lense out and resealing the new lenses into gause and sealing whole unit back against teh body from inside - if that makes sense.
I used a mastic from a boatyard which is pretty secure & firm. I think if you try to cut it out from inside it will look messy and take a very long time. I found teh gause easily pushed out.
Good luck - the look is a huge improvement
I used a mastic from a boatyard which is pretty secure & firm. I think if you try to cut it out from inside it will look messy and take a very long time. I found teh gause easily pushed out.
Good luck - the look is a huge improvement
The lense is attached to the grill, usually silicon only. THe back of the unit will screw out so you could then remove the grill, put in the lenses in comfort, refit grill and screw in the bulb holder bit. They are the same as Griff units. Military Land Rover/Bedford/tank spec - Lucas screw units for ease of changing bulbs without carrying screwdrivers etc.
FFG
FFG
grand-one said:
Want to change to the clear style but the old ones dont want to go!
I'm not trying to sound pedantic here,but can you actually get clear ones for the front?I take it you mean the white ones,which are still opaque,but a pure clear lens is something i would be interested to see.Is there such a lens in the correct size?Gassing Station | Chimaera | Top of Page | What's New | My Stuff



