Exige shell on S1 Elise?
Exige shell on S1 Elise?
Author
Discussion

Seany88

Original Poster:

1,249 posts

251 months

Wednesday 13th September 2006
quotequote all
Is this possible? Anyone have a definitive answer?

mr_c

2,508 posts

260 months

Thursday 14th September 2006
quotequote all
EliseParts sell the conversion. Basically I think all you need are the front and rear clams, the roof, engine cover and rear spoiler. There will be some other bits too. Oh, make sure you go to Exige 16" Front and 17" Rear wheels or it'll look odd.

You could also see if Maddog's (search for Maddog Motorsport) Exige clams are any cheaper.

Seany88

Original Poster:

1,249 posts

251 months

Thursday 14th September 2006
quotequote all
Thanks, Maddog's site isn't working but went onto eliseparts and its £3500 for the kit! Which isn't bad I suppose when thinking about it, how much could I sell the standard bits for?

When people say clam does this include the bonnet?

Paul RN

1,168 posts

245 months

Thursday 14th September 2006
quotequote all
A clam is basically the body work. Elise has a front and a rear clam.

Seany88

Original Poster:

1,249 posts

251 months

Thursday 14th September 2006
quotequote all
Ok understood.

Now to find a body-damaged S1 elise! Any offers?

Janitor

2,372 posts

250 months

Thursday 14th September 2006
quotequote all
Saw this posted somewhere recently:

www.sportssalvage.com/link%20pages/E01.htm

Seany88

Original Poster:

1,249 posts

251 months

Friday 15th September 2006
quotequote all
Ooohh, perfect! Cheers

Seany88

Original Poster:

1,249 posts

251 months

Tuesday 19th September 2006
quotequote all
Having delved into this a bit more, need a few more answers.

How difficult is it to change clams? How is the rear clam attached to the chassis? Anyone care to gauge how difficult it would be to replace by myself? Read a few comments that the exige clam is longer or fits differently...

Following on from that, anyone know if the whole lot needs to be replaced in one go to fit properly? I'm guessing not, because the doors are the same just seeking confirmation really.

Finally for the eliseparts kit, would the quality be similar to original lotus?

Paul RN

1,168 posts

245 months

Tuesday 19th September 2006
quotequote all
Seany88 said:
Having delved into this a bit more, need a few more answers.

How difficult is it to change clams? How is the rear clam attached to the chassis? Anyone care to gauge how difficult it would be to replace by myself? Read a few comments that the exige clam is longer or fits differently...

Following on from that, anyone know if the whole lot needs to be replaced in one go to fit properly? I'm guessing not, because the doors are the same just seeking confirmation really.

Finally for the eliseparts kit, would the quality be similar to original lotus?


a) depends how good you are with a spanner, loads of people remove their clams without a problem.
b) ask Geary @ Eliseparts as the kit goes over some of the existing parts by reading the spec.
c) ask Geary @ Eliseparts, although you're buying motorsport panels rather than lotus exige clams.

Don't forget you'll need it sprayed, prob about 1.5/2k on top.

Edited by Paul RN on Tuesday 19th September 21:52

Seany88

Original Poster:

1,249 posts

251 months

Tuesday 19th September 2006
quotequote all
I've emailed eliseparts now so will see what they say.

Another thing, does anyone think this is worth it? Its not just for aesthetics (although it mostly is ) but in the future i'd like to consider dropping a honda k20 in there too.

Should I wait for a std bashed-up elise to come along? As from that link posted by Janitor, they want £7500 bottom price (because its a 135 sport). All ideas and input appreciated.

bogie

17,108 posts

303 months

Tuesday 19th September 2006
quotequote all
youre probably looking at £5K + of bits an spraying to do it...then youd want wheels etc...and thats if you do it yourself...and it would still be an Elise come resale time

IMO youd be better off selling the car and buying an Exige in the long term......

Seany88

Original Poster:

1,249 posts

251 months

Tuesday 19th September 2006
quotequote all
Just found this:

[url]http://cgi.ebay.co.uk/ws/eBayISAPI.dl[/url]

Now that would be a bargain don't you think?

I realise it will still be an elise, but it gives me the opportunity to have it how I wanted it in the first place i.e. white! Plus I cannot afford an exige for a good few years.

I know this is a basic lazy question, but what are the actual differences between an elise and exige? As i seem to have got it into my head that an elise can be made to perform as well as an exige...?

GTRene

22,806 posts

255 months

Wednesday 20th September 2006
quotequote all
those guys at Red Motorsport Germany have also some Exige clams for sale, see the list;

www.red-motorsport.de/html/body_schnappchen.html

GTRene

S Works

10,166 posts

281 months

Wednesday 20th September 2006
quotequote all
bogie said:
youre probably looking at £5K + of bits an spraying to do it...then youd want wheels etc...and thats if you do it yourself...and it would still be an Elise come resale time

IMO youd be better off selling the car and buying an Exige in the long term......

Agreed. Remember that Red one with the TT conversion that was for sale last year for about £12/13k? Ripe for an SC Honda... was considering it until my car came up.