Clock bulb and holder
Discussion
I've just aquired a clock for use in my switch panel modification, but it appears to be missing the bulb holder. It's a standard S clock. Has anyone got any details about what I need to get. Otherwise I'll have to try gaining access to the back of the dash to look at the existing one.
Edited by russ35 on Saturday 23 September 23:26
Russ,
It should be the same bulb holder as for all the other instruments. Black plastic with a couple of retaining shoulders which takes a cap style bulb. Think it's a common fitment, might be worth a check behind the dash to see if it's still part of the loom - may be tucked up behing the rev counter or speedo.
W.
It should be the same bulb holder as for all the other instruments. Black plastic with a couple of retaining shoulders which takes a cap style bulb. Think it's a common fitment, might be worth a check behind the dash to see if it's still part of the loom - may be tucked up behing the rev counter or speedo.
W.
Managed to track down the holder from here
www.jdo1.com/index.html very helpful guy so might be worth checking out if you have any speedo, rev counter problems.
This shows the back of another Kienzle clock with what I needed (the round metal thing)
Bonefish, your cheque arrived so I'll sort out posting the air vents tomorrow.
www.jdo1.com/index.html very helpful guy so might be worth checking out if you have any speedo, rev counter problems.
This shows the back of another Kienzle clock with what I needed (the round metal thing)
Bonefish, your cheque arrived so I'll sort out posting the air vents tomorrow.
Gassing Station | S Series | Top of Page | What's New | My Stuff