Alternator Belts
Discussion
just fitted a new belt to my 4.0 with power steering, purchased the belt from my local spares shop, it was made by QH
and the code was QBR71850, 7 stands for the number of ribs and 1850 is the length, cost £11
if you look on the belt fitted on your car you should be able to read the numbers and code on the outside of the belt it may be longer due to the air-con.
Phil
and the code was QBR71850, 7 stands for the number of ribs and 1850 is the length, cost £11
if you look on the belt fitted on your car you should be able to read the numbers and code on the outside of the belt it may be longer due to the air-con.
Phil
providing you give a motor factor the dimensions off the belt 1024 pk7 for example,denotes its 1024 millimetres and as 7 ribs/grooves,if you go to a good motor factor you will get a Gates / Contetec / unipart or similar it does not mean you will get an inferior part,failing that just pay dealer prices but you will normally see its made by someone as above,very few motor manafacturers make things like this themselves.
Gassing Station | Chimaera | Top of Page | What's New | My Stuff



