S1 Expansion Tank - What else does it fit?
S1 Expansion Tank - What else does it fit?
Author
Discussion

Jez49

Original Poster:

234 posts

242 months

Monday 2nd October 2006
quotequote all
As above, my expansion tanks sprung a leak and I wondered if its common to other cars such as metro's etc so I can source a new one cheaper than the £30 odd eliseparts want.

Thanks

jondude

2,441 posts

248 months

Monday 2nd October 2006
quotequote all
I would imagine you are only talking a tenner or so if you can buy new elsewhere - may even be more expensive as it will be an original part?

If you do want to get one real cheap, then a used one is the best option. Junks on SELOC will probably have one or be able to point you in the right direction, or you could google Elise breakers, check e-bay.

How did the present one 'spring a leak '? Unless it has holed ( again, how?? ) are you sure it isn't a loose hose or especially the hoseclip?

cej

961 posts

253 months

Monday 2nd October 2006
quotequote all
my brother said it looked like somehing off a VW. Didn't say which model.

Jez49

Original Poster:

234 posts

242 months

Tuesday 3rd October 2006
quotequote all
The old ones covered in cracks from age / heat and now has a small hole in the top nicely spraying water out, gonna be relying on duct tape till wednesday, by the time postage etc had been added to the elise parts one it was only a couple of pounds less than one from the local dealer. £38 seems a little high for a piece of plastic tho!

jondude

2,441 posts

248 months

Tuesday 3rd October 2006
quotequote all
Yep, take your point about prices - just don't ever get a Honda motorcycle then, believe me!

There is a product called JB Weld , or JB Water Weld in this case, I would think. It is like a piece of putty which you can form into place, but once it hardens it is damn strong.

Google JB Weld for all temperature details and how to use it. About £6 from Halfords, although they may have to order it.

It will work, no doubt about that. It is then up to you to be able to drive without thinking ' is it still holding??? '.

I usually find after an hour of driving at 25 mph ( as if that will help? ) if it holds, it is out of mind and time to blast.

You can always use this until you track down a cheap replacement.

tuscan_thunder

1,763 posts

277 months

Tuesday 3rd October 2006
quotequote all
it's a stock K-series part isn't it? Sure it's the same as on 200/400 Rovers and Freelanders