front bumper damage...
front bumper damage...
Author
Discussion

111s_amz

Original Poster:

146 posts

242 months

Tuesday 3rd October 2006
quotequote all
afternoon chaps,
on the way to work this morning i went over a rather large speed bump without anticipating the size of it..clinched my teeth as i heard a loud scrape furious anyway there are 2 not so big chips in the paint on each side of the bumper and a small crack underneath it nothing to big thank god! by the looks of it i should be able to get it filled in and then just touched up, so if someone could point me in the right direction i would very much appreciate it...Cheers

Amz

p.s ill get some pictures up of the damage when i get home

Trixster

252 posts

249 months

Tuesday 3rd October 2006
quotequote all
Cover the damage up with a splitter?

111s_amz

Original Poster:

146 posts

242 months

Tuesday 3rd October 2006
quotequote all
point me in the direction of some please mate....

tomtom

4,266 posts

261 months

Tuesday 3rd October 2006
quotequote all
Duct tape!

Or take it round to Sinclaire in Romford.

S Works

10,166 posts

281 months

Tuesday 3rd October 2006
quotequote all
Contact Tigga on SELOC - he can supply you a black bolt-on splitter for the front in black gel coat for £99. Looks great.

boggy

4,603 posts

266 months

Tuesday 3rd October 2006
quotequote all
S Works said:
Contact Tigga on SELOC - he can supply you a black bolt-on splitter for the front in black gel coat for £99. Looks great.


I want one Tim, how easy are they to fit?

Boggy

S Works

10,166 posts

281 months

Tuesday 3rd October 2006
quotequote all
A few bolts I think, u2u Tigga and I'm sure he'll let you know.

PB9

175 posts

253 months

Tuesday 3rd October 2006
quotequote all
If your car is not too low, you should also consider measuring the speed bump height.. ( I think an elise at above 110 should go over all speed bumps... )

They are supposed to be a max size, dont know what, but sure it will be added to this thread for by somebody.

If its too high you might be able to get compensation to fix, not sure who you talk to about this in your area.

-pete

mahju

407 posts

242 months

Tuesday 3rd October 2006
quotequote all
PB9 said:
If your car is not too low, you should also consider measuring the speed bump height.. ( I think an elise at above 110 should go over all speed bumps... )

They are supposed to be a max size, dont know what, but sure it will be added to this thread for by somebody.

Here you go: Highways (Road Humps) Regulations 1996

www.dft.gov.uk/stellent/groups/dft_roads/documents/page/dft_roads_504796-03.hcsp

Seems to depend on the type of bump and the speed limit...

111s_amz

Original Poster:

146 posts

242 months

Tuesday 3rd October 2006
quotequote all
S Works said:
Contact Tigga on SELOC - he can supply you a black bolt-on splitter for the front in black gel coat for £99. Looks great.


Cheers for that tim im just waiting for him to get back to me thumbup

jondude

2,441 posts

248 months

Tuesday 3rd October 2006
quotequote all
Yep, and don't worry ( too much ) as it shouldn't be too expensive, especially if it is in an area where a 100% paint match isn't necessary.

A good tip I got was to slow right down before a big speed bump - use the hazards if Chris The Chav is up your arse - then blip the throttle and 'squirt ' forward. The jolting acceleration lifts the front. Not much, but in these cases every little extra inch does matter.

111s_amz

Original Poster:

146 posts

242 months

Tuesday 3rd October 2006
quotequote all
cheers for the tip Jon, im just gonna order a splitter which should cover up the scuff