"Shivering" throttle?
"Shivering" throttle?
Author
Discussion

jaykaybi

Original Poster:

3,494 posts

252 months

Tuesday 10th October 2006
quotequote all
Has anybody experienced this before?

I have an induction kit fitted, which recently became parted from the throttle body (literally only for 30 miles at most I think) - this may be completely irrelevant, but I'm just trying to offer the full picture. It may be entirely coincidental timing of the two things.

For some reason, I can hear the engine/exhaust/gearbox/but-I-think-most-likely-induction-hence-the-rest 'shivering,' by which I mean rather than smoothly and gloriously progressing up the noisy curve, the progress seems to quiver and stutter on its way up (not a lot, but definitely noticeably) and especially at higher revs or when under heavy load (like if I select too high a gear)

paperbag

SO... I noticed the induction kit tube (from filter to throttle body) was no longer properly attached (had partially slipped out, leaving an opening) and thought "Aha!", reconnected it and drove off expecting the now presumed uninterrupted air supply to have sorted the issue.
However, it didn't. Cue baffled pondering.

Any ideas?

Edited by jaykaybi on Tuesday 10th October 11:50

jaykaybi

Original Poster:

3,494 posts

252 months

Tuesday 10th October 2006
quotequote all
Bump...

Please? Any ideas at all? There's a run this weekend which depends on me sorting this out!

S works

10,166 posts

281 months

Tuesday 10th October 2006
quotequote all
No idea to be honest dude - probably some kind of sensor or maybe the IACV needs cleaning out?

Have you tried on the Tech Forum of SELOC?

jaykaybi

Original Poster:

3,494 posts

252 months

Tuesday 10th October 2006
quotequote all
S works said:
No idea to be honest dude - probably some kind of sensor or maybe the IACV needs cleaning out?

Have you tried on the Tech Forum of SELOC?


Cheers, but

[dumbass mode] what's an IACV? [/dumbass mode]

I'm off to try the SELOC tech forum as well...


Thanks for trying!

S Works

10,166 posts

281 months

Tuesday 10th October 2006
quotequote all
Idle Air Control Valve.

jaykaybi

Original Poster:

3,494 posts

252 months

Tuesday 10th October 2006
quotequote all
Ta...

GreenV8S

31,027 posts

315 months

Tuesday 10th October 2006
quotequote all
Is it a misfire, or the whole engine dying for a moment, or just going a bit flat for a moment?

jaykaybi

Original Poster:

3,494 posts

252 months

Tuesday 10th October 2006
quotequote all
GreenV8S said:
Is it a misfire, or the whole engine dying for a moment, or just going a bit flat for a moment?



None of the above I believe - it's like there's a problem when the engine's working hard that's making its progress 'quiver.' I don't know how better to describe it - the revs rise, but less smoothly than normal.

Aha....hmmm....try this....



The revs take on a machine-gun character as they build - although absolutely nowhere near as harsh.

jaykaybi

Original Poster:

3,494 posts

252 months

Tuesday 10th October 2006
quotequote all
Bollox. It's a misfire according to more mechanically minded chaps.

GreenV8S

31,027 posts

315 months

Tuesday 10th October 2006
quotequote all
That sounds like a misfire i.e. one cylinder stops burning properly.

jaykaybi

Original Poster:

3,494 posts

252 months

Thursday 12th October 2006
quotequote all
Hmf. I need a new crank positioning sensor. And additionally, there's a leak from the exhaust manifold.

What sort of bills am I facing?