Removal of seat inserts ?

[gary_de_tam]

Can any advise as to whether this is possible,
it does come off almost as these are held in
by velcrow. It appears to be fixed under the
frame though by the Lamonta fabric....
.....seat got so wet the other day, need to dry the
foam insert out.

TIA, gt.

[valhalla]

gary_de_tam said:

Can any advise as to whether this is possible,
it does come off almost as these are held in
by velcrow. It appears to be fixed under the
frame though by the Lamonta fabric....
.....seat got so wet the other day, need to dry the
foam insert out.

TIA, gt.

Mine are just held in with velcro.
Dave

[T66ORA]

The front seat base is held in by velcro but the rear lamonta fabric is tucked under the base but is only glued into place, pull the base out by the velcro and carefully pull the glued base up slowly so not to rip or tear the lamonta, DO NOT decide to soak the base/trim/foam like i did as it took over a week to dry in the house

[gary_de_tam]

cheers guys, my foam is like a soaked sponge
and will never dry out unless I place in a
warm location...

What glue do people use to adhesive the interior
back in place ?

[T66ORA]

gary_de_tam said:

cheers guys, my foam is like a soaked sponge
and will never dry out unless I place in a
warm location...

What glue do people use to adhesive the interior
back in place ?

I just tucked mine up and under the seat base webbing, no problems plus if i need to take it out again it can be done in seconds

Edited by T66ORA on Saturday 14th October 22:45