TVR T350 C....... WOW
Discussion
This weekend at the Northants meet a guy (sory didn't catch your name if you write on this site) turned up in his brand new T350 C. Had only seen pictures up till then, and I thought it looked a lot better than the outgoing Tamora (sorry all you Tamora owners).
But WOW
. In the flesh it looks stunning!!
The design is very well resolved all round a lot better than the original Tamora and to my mind one of the best looking TVR's ever, the panel gaps were very good, and general quality was also superb (not to sure about the petrol filling escapade though) and the interior was just as expected great looks and loads of buttons with no markings.
Now where did I place my piggy bank and that big hammer!!

But WOW
. In the flesh it looks stunning!! The design is very well resolved all round a lot better than the original Tamora and to my mind one of the best looking TVR's ever, the panel gaps were very good, and general quality was also superb (not to sure about the petrol filling escapade though) and the interior was just as expected great looks and loads of buttons with no markings.
Now where did I place my piggy bank and that big hammer!!

The issues with the filler are being resolved by the factory. In the mean time it will fill normally if the nozzel is pushed all the way in and held at 90 deg with the pipe to the pump going off to the 3 oclock position.
I've now filled up twice like this at normal rate with no spillage. Its partley due to the vent pipe being mounted at the 9 oclock position and not 12 oclock
I've now filled up twice like this at normal rate with no spillage. Its partley due to the vent pipe being mounted at the 9 oclock position and not 12 oclock
Gassing Station | General TVR Stuff & Gossip | Top of Page | What's New | My Stuff



