Rplacement HT leads for V8

[convert]

Just wondering if any of you folks had bought from this ebayer

http://cgi.ebay.co.uk/TVR-MORGAN-10mm

If so how good was the quality of the leads?

Edited to add aplologies for the speeling mistak in the threed tittle [/footnote

Edited by convert on Wednesday 25th October 14:34

[chassis 33]

Send Joolz (trackcar) an email just to check, I think they're the ones he uses, if so yes, they're good, cured the misfire at 4500ish rpm I was getting on the racer by swapping from er...another leading brand. Quality is good, only had them fitted a few months so can't comment on the longevity, but Joo wouldn't use them if they're crap.

Regards
Iain

[dickymint]

Tim at ACT www.actproducts.co.uk/ignition.php you'r not saving much on those ebay ones.

[leorest]

dickymint said:

Tim at ACT www.actproducts.co.uk/ignition.php you'r not saving much on those ebay ones.

Don't think you spotted the "ACT+VAT" bit

[gsx600]

These are the ones I bought, very helpful chap - albeit owns a Chim ,

Leads are fantastic and cured most of my misfiring issues I had, if its for a wedge you may need to measure your king lead as the standard set was too small for me, but the gent kindly sent me another one

Look good 10mm red but the standard clips would not fit, but I managed to find some that did.

Tell you in 2 years if they outlast my last set from a leading manufacture (blue in colour )

[convert]

Cheers guys, seeing as I get paid tomorrow I think i'll treat the ole girl to a set.

Would have bought some last month, bl00dy Gatso's !

[simonb9]

gsx600 said:

These are the ones I bought, very helpful chap - albeit owns a Chim ,

Leads are fantastic and cured most of my misfiring issues I had, if its for a wedge you may need to measure your king lead as the standard set was too small for me, but the gent kindly sent me another one

Look good 10mm red but the standard clips would not fit, but I managed to find some that did.

Tell you in 2 years if they outlast my last set from a leading manufacture (blue in colour )

When you say 'standard clips didn't fit' what do you mean ??

Regards,

Simon

[gsx600]

[quote=simonb9
When you say 'standard clips didn't fit' what do you mean ??

Regards,

Simon
[/quote]

As in the management clips that the plug leads would sit in, as standard leads are 6mm ?, so fitting a 10mm lead in mounting would be a bit of a squash and probably damage the new lead

[Graham]

You could also give jamie a call at castle race engines, they have their own branded leads and the shrouds

www.castle-race-engines.com/index.php?f=data_home&a=3


cheers

Graham