Wheel bearing part numbers
Discussion
After a track day my car has developed a loose rear wheel bearing. I've searched this forum and my build manual and can't find part numbers or the original application for the bearing (some type of Ford?).
Greatly appreciate your help, next track day 11/9/6.
Are these tapered roller bearings or sealed ball bearings?
Thanks,
Ken Wright
Ultima 215236
Greatly appreciate your help, next track day 11/9/6.
Are these tapered roller bearings or sealed ball bearings?
Thanks,
Ken Wright
Ultima 215236
The bearings are fine, it was the upper mount point for the upright. The bolt that passes through the rose joint on the upper A arm is a tiny bit loose in the joint. Tightned it back up and the play is gone.
Will have to get a good micrometer to measure the inside of the rose joint and the bolt. Niether of them appeared to have any damage.
Appreciate the emails with part numbers.
ken
Will have to get a good micrometer to measure the inside of the rose joint and the bolt. Niether of them appeared to have any damage.
Appreciate the emails with part numbers.
ken
Gassing Station | Ultima | Top of Page | What's New | My Stuff


