the definative tyre choice thread
Discussion
SO2's
But am gonna change very soon....so will watch this thread with interest.
I happened to take a close look at them this weekend and the SO2's are cracking all around the outer edge of the tread...not sure what this is due to, but a bit worrying. They are quite new, only done 2000km's. Wonder if the cracking/drying out is due to extreme temperature changes? Cold winters - hot summers etc.
K
But am gonna change very soon....so will watch this thread with interest.
I happened to take a close look at them this weekend and the SO2's are cracking all around the outer edge of the tread...not sure what this is due to, but a bit worrying. They are quite new, only done 2000km's. Wonder if the cracking/drying out is due to extreme temperature changes? Cold winters - hot summers etc.
K
madeinengland said:
byker28i said:
Eagle F1's - I like them
Me too, Iv'e just bought a set and they are a lot better than the previous SO2's
Edited by madeinengland on Sunday 29th October 21:23
I concur!
Goodyear Eagle F1's seem to be a great tyre for the car, and provide excellent grip in the wet and dry along with a good wear rate!
Cerby4.5
cerby4.5 said:
madeinengland said:
byker28i said:
Eagle F1's - I like them
Me too, Iv'e just bought a set and they are a lot better than the previous SO2's
Edited by madeinengland on Sunday 29th October 21:23
I concur!
Goodyear Eagle F1's seem to be a great tyre for the car, and provide excellent grip in the wet and dry along with a good wear rate!
Cerby4.5
Exactly - had mine on for 12 months and they are a great improvement over the SO2's.
Not driven them yet but I have a set of Falkens waiting as they seem to have a good press from the cerbera massive.
I previously tried F1's on the V8S and found them to be made of jelly and quite frightening when fitted on the rear, not so bad on the front. I know they are different cars obviously but they were bad enough for me never to fit them to any power rwd car again
.
I previously tried F1's on the V8S and found them to be made of jelly and quite frightening when fitted on the rear, not so bad on the front. I know they are different cars obviously but they were bad enough for me never to fit them to any power rwd car again
.HarryW said:
Not driven them yet but I have a set of Falkens waiting as they seem to have a good press from the cerbera massive.
I previously tried F1's on the V8S and found them to be made of jelly and quite frightening when fitted on the rear, not so bad on the front. I know they are different cars obviously but they were bad enough for me never to fit them to any power rwd car again
.
I previously tried F1's on the V8S and found them to be made of jelly and quite frightening when fitted on the rear, not so bad on the front. I know they are different cars obviously but they were bad enough for me never to fit them to any power rwd car again
.Interesting. I fitted a set to my old capri (3.1 long stroke engine) and they transformed the handling so I did the same to my wifes MX-5 and they lightened the steering whilst really improving the handling.
My Cerbera has a pair of F1's on the rear and a mixed make on the front. I've had no real problem with the rears in the wet/damp (apart from those induced with too much right foot).
byker28i said:
HarryW said:
Not driven them yet but I have a set of Falkens waiting as they seem to have a good press from the cerbera massive.
I previously tried F1's on the V8S and found them to be made of jelly and quite frightening when fitted on the rear, not so bad on the front. I know they are different cars obviously but they were bad enough for me never to fit them to any power rwd car again
.
I previously tried F1's on the V8S and found them to be made of jelly and quite frightening when fitted on the rear, not so bad on the front. I know they are different cars obviously but they were bad enough for me never to fit them to any power rwd car again
.Interesting. I fitted a set to my old capri (3.1 long stroke engine) and they transformed the handling so I did the same to my wifes MX-5 and they lightened the steering whilst really improving the handling.
My Cerbera has a pair of F1's on the rear and a mixed make on the front. I've had no real problem with the rears in the wet/damp (apart from those induced with too much right foot).
Every car is different, so are the owners I thought the SO3's were good, nice strong side wall and predictable handling
. With the F1's it seemed that the side wall's were made of jelly in comparason and when fitted to the rear it felt as if the they were flexing with the torque under acceleration, most disturbing
. I had to increase the pressure so much to put some stiffness into them it was beyond a joke. I swapped them with the SO3's off the front, problem went away, so no doubting it was the tyres.
I left them on the front (not forgetting V8S's as standard have the same rims front/rear) and put up with the fact that I lost steering sharpness and feel by a large percentage. As I said before never again, but thats me
. Gassing Station | Cerbera | Top of Page | What's New | My Stuff



. A lot of people have ben happy with Falkens too.