BMW specailist in the Chepstow area
Discussion
I know of a few guys with M Roadsters / Coupes who would be interested in using an experienced technician.
Maybe you could help me .... my 1998 Z3M brakes are giving me a headache right now with the rear end braking before the fronts.
New discs, pads and seal kits etc have been fitted without joy.
Any ideas ?
Maybe you could help me .... my 1998 Z3M brakes are giving me a headache right now with the rear end braking before the fronts.
New discs, pads and seal kits etc have been fitted without joy.
Any ideas ?
That can really only be a master cylinder fault or a line mix up-has it had any work done on the DSC hydrolic pump/accident repair?
Are the fronts binding when you lightly press the pedal,or do they suddenly snatch/lock up when they come on?and do both fronts do the same thing at the same time-when its wheel free
Are the fronts binding when you lightly press the pedal,or do they suddenly snatch/lock up when they come on?and do both fronts do the same thing at the same time-when its wheel free
Edited by blackspider on Thursday 23 November 08:18
Ther must either be dirt in the split to the front or the master cylinder is stuck.
The most likely is the master cylinder.
Undo the line from the master and at the caliper ends a blow through to ensure there isnt anything in the line-If its got ASC make sure You disconnect it there as well before you blow it through.
The most likely is the master cylinder.
Undo the line from the master and at the caliper ends a blow through to ensure there isnt anything in the line-If its got ASC make sure You disconnect it there as well before you blow it through.
Edited by blackspider on Thursday 23 November 13:27
Gassing Station | BMW General | Top of Page | What's New | My Stuff



