Grantura tie rod ends

[granturadriver]

Dear all,

I’m looking for the correct tie rod ends for my 1962 Grantura Mk 2A with worm and sector steering (Ford Anglia type) and I don’t know from which car the track rod ends have been taken.

There are two different sizes of tie rod ends at the front. The smaller ones (inner) have a conus with diameter circa 11mm, on the rubber there is the code 022 – 0002 –924 –009 and V5 – 12099 – CFW C29, on the metal corpus there is the code 3A.

The bigger ones (outer) have a conus with a diameter about 13 mm and nothing left on the rubber. On the metal corpus there is the code 5. The diameter of the tie rod is about 15 mm.

I think on the rear there are only the bigger ends fitted.

Can anyone help with car type, part number or something else?

Martin

[thegamekeeper]

Martin Assuming your car to be RHD. Nearside track rod ends. Large outer is L/H thread and small inner is R/H thread. Offside track rod ends Large outer is R/H thread and small inner is L/H thread. rears are all large and presumably 2 L/H thread and 2 R/H thread. The small ones are from split screen Morris Minor with OHV engine approximately 1953 to 1957. The large ones are from Riley 1500 of a similar age. Confused, soam I !! and remember all TVR's are not the same, particularly at that age. Hope this helps sTeVeR