Griff mirror switch wiring

[griffert]

Hi - I disconnected my drivers door mirror control switches (2) to remove the door trim panel and have possibly put the wires back on the wrong connectors as now I'm blowing a fuse !.
If anyone has any wiring information or could send me a photo of the back of the switches whilst still connected to the wiring it would be a great help.
(e-mail - [e-mail])

[Ozstyle]

Hi,

when I removed my door card and connectors I'm pretty sure that the wire colours to both 5 pin plugs/sockets where different enough not to need tagging, it was evident which plug fitted which socket. Sure there was one pink wire with white trace that was common to one plug and socket only. There is a diagram in the bible p280 which may help.

Ozstyle

[griffert]

oz,thanks for the reply, I think the connectors you refer to are ok on mine, the wires into the switch for the mirrors are individual single connectors and thats where the problem lies - there are 6 wires in each and im sure mine are mixed up ?

[Ozstyle]

yep,
know which ones you mean, I definately made a note of their location. There is a diagram in the bible which may help but I think some of the wires were different colours.

Ozstyle