Trailering a Chim
Trailering a Chim
Author
Discussion

schmokin1

Original Poster:

1,223 posts

242 months

Tuesday 30th January 2007
quotequote all
Hi all

Tomorrow I join the fold with my first TVR, a 4l Chim!

I'm picking it up using a trailer. Does anyone have any tips re ground clearance, winch cable attachment, ratchet strap attachment so I don't scratch or generally damage it?

Cheers all
schmo

schmokin1

Original Poster:

1,223 posts

242 months

Tuesday 30th January 2007
quotequote all
tumbleweed

spend

12,581 posts

281 months

Tuesday 30th January 2007
quotequote all
Not really sure, not something I have a great experience of ( touch wood ) but Ill try & start the ball rolling for you:

schmokin1 said:
Does anyone have any tips re ground clearance

FA, you will need long ramps

schmokin1 said:
winch cable attachment

with difficulty. I can get mine up ramps, with 2 people using the wheel spokes as levers ~ not too much trouble (niether of us macho types ~ oops what have I said!)

schmokin1 said:
ratchet strap attachmento

I'd tie it down to the crossmembers of the outriggers if it were me.

Dave

jonathant

880 posts

314 months

Tuesday 30th January 2007
quotequote all
If you can drive it onto the trailer then I suggest you do that. Attaching a winch cable to the tow loop might damage the chin spoiler (as it's lower than the tow loop). As already mentioned, use extra long ramps or extra bits of wood to reduce the angle between the Chimaera and the road. Park in gear.

schmokin1

Original Poster:

1,223 posts

242 months

Tuesday 30th January 2007
quotequote all
ok thanks I'll plan for the tow loop to be no good and for clearance probs.

cheers
schmo

chris13

45 posts

243 months

Tuesday 30th January 2007
quotequote all
why arnt you driving her homedriving


Edited by chris13 on Tuesday 30th January 17:58

medlamaniac

51 posts

240 months

Tuesday 30th January 2007
quotequote all
The best way to TIE the car down is by special ratchet straps that go around each wheel and then hooked onto the trailer mount positions and ratchet up, don't have to touch the bodywork at all, alternatively you can us ordinary ratchet straps loop these around the wheel and back onto the trailer mount, then ratchet up, you will only need to strap down the wheels diagonally. coupled with the hand brake on and the winch hooked onto the chassis for good measure or the suspension you should be good to go!!!.

mm33

27 posts

258 months

Tuesday 30th January 2007
quotequote all
pick up a cerb using a hss hireshop vehicle trailer, no problem at all.

schmokin1

Original Poster:

1,223 posts

242 months

Tuesday 30th January 2007
quotequote all
not driving her home cos she doesn't go! got a few jobs to do on her first to make her MOTable. I couldn't have afforded a good runner so I found a good (I think/hope) non runner!

zumbruk

7,848 posts

290 months

Tuesday 30th January 2007
quotequote all
I trailer mine to sprints, and there are few things worth knowing;

- Chims are 14ft long! It's a bloody big car for a 2 seater.

- Chims are dead low. You'll likely need extended ramps, or an arrangement of blocks and planks plus ramps to get it on without catching the underside - mine still drags its arse onto the ramp, despite the blocks/planks thing.

- Chims are quite heavy. Mine's 1200 kg. Make sure that the trailer's man enough for the job, that whatever you tow it with is heavy enough (recommended that the trailer+load be no more than 85% of the weight of the tow vehicle), that the tow vehicle is OK to tow 1.7 tonnes and that whoever's driving has the appropriate license. If they passed their test after 1997, they don't. (IIRC)

- I fasten mine down with wheel straps, so I can't advise on fastenings, except do them up *tight* and stop and check them after 15 minutes. Sometimes they slacken off by themselves. No idea why.

jellison

12,803 posts

307 months

Wednesday 31st January 2007
quotequote all
zumbruk said:
I trailer mine to sprints, and there are few things worth knowing;

- Chims are 14ft long! It's a bloody big car for a 2 seater.

- Chims are dead low. You'll likely need extended ramps, or an arrangement of blocks and planks plus ramps to get it on without catching the underside - mine still drags its arse onto the ramp, despite the blocks/planks thing.

- Chims are quite heavy. Mine's 1200 kg. Make sure that the trailer's man enough for the job, that whatever you tow it with is heavy enough (recommended that the trailer+load be no more than 85% of the weight of the tow vehicle), that the tow vehicle is OK to tow 1.7 tonnes and that whoever's driving has the appropriate license. If they passed their test after 1997, they don't. (IIRC)

- I fasten mine down with wheel straps, so I can't advise on fastenings, except do them up *tight* and stop and check them after 15 minutes. Sometimes they slacken off by themselves. No idea why.

1200 kg - jesus - Are you sure you are not carrying a few illegals in the boot?