Moving the pedal box

[lasertam]

Having read another post, mentioned that the pedal box can be adjusted on a Tamora (and others I guess). Can anyone give any idea of how difficult/easy that really is to do? Is it deffinitely a garage job, or could I do it myself?

[maddog-uk]

some say its easy, i got the tvr centre to do mine and they did it expertly and adjusted the cables, tis upto you, but you could try castle tvr or if you fancy a run, mark and martin at the tvr centre would be even better!

[johnFairfield]

I got HHC to do mine, it took them about an hour.

John

[scotty1]

Not sure myself but if it turns out to be a garage job give Leven Technology a call, I came across them recently and its the best service your gonna get by a long shot, in Essex at least....

[lasertam]

Surely someone has had a go themselves?

[SHIFTY]

Yes, done mine fairly easy but you will need to be ambidextrous putting the bolts back in. You will need to jack the car up so that you can drill through the floor from underneath. Undo the existing nuts and push the bolts through, this will allow the pedal box to be moved out of the way whilst you drill the floor. There is an outrigger that the seat is bolted to and this is already predrilled but the floor is not. Then simply insert the bolts through the new holes tigten up and finished. took me about an hour as it is arkward trying to get the bolts aligned.

[lasertam]

Thanks Shifty. I would give my right arm to be ambidextrus (sp?)....