Griffith Alarm
Griffith Alarm
Author
Discussion

eddie123

Original Poster:

47 posts

263 months

Friday 9th February 2007
quotequote all
My alarm has recently stopped bleeping when I alarm and disable the alarm. It is the standard original kit, and my Griff is a '95 500. Any ideas anyone? Cheers

dnb

3,330 posts

271 months

Friday 9th February 2007
quotequote all
Siren filled up with water? It's in prime position for this to happen...

Griffit

375 posts

236 months

Friday 9th February 2007
quotequote all
I have a 95 Griffith too, but mine had the original system replaced with the later Meta system a couple of years ago. Should this beep when I arm / disarm? The only time I noticed it do this was when I'd left something open as I recall - bonnet was up, one of the doors / boot may have been ajar... The rest of the time it is silent - unless I set it off!

bluebottle

3,498 posts

269 months

Friday 9th February 2007
quotequote all
If its the old Gemini alarm, the right button is for silent arm/de-arm and the left one beeps.
Hav tried both buttons to be sure?

eddie123

Original Poster:

47 posts

263 months

Friday 9th February 2007
quotequote all
Mine used to bleep once to set alarm and three times on disarming or if a door was not shut properly it also made a different sound. The key fob has two buttons and one (can't remember off hand which) could be used for a silent mode. Neither button gets a bleep now so there's definately summat up!

wild skinner

32 posts

263 months

Friday 9th February 2007
quotequote all
It is either a corroded connection going to the siren or the siren its self. Very common problem.

eddie123

Original Poster:

47 posts

263 months

Saturday 10th February 2007
quotequote all
Thanks for suggestions; looks like a job for Sunday