Best way to clean shower cubicle glass?
Discussion
Does anyone have any great tips on how to clean smoked glass shower cubicle glass. I'm not sure what the problem is, but could be limescale/water staining (I've used 'Viakal' and other limescale removers to not much effect).
Also, what's the best way to get the grout in between tiles to look like new again? Mould staining on these, I think.
Thanks in advance!
Also, what's the best way to get the grout in between tiles to look like new again? Mould staining on these, I think.
Thanks in advance!
Does anyone have any great tips on how to clean smoked glass shower cubicle glass. I'm not sure what the problem is, but could be limescale/water staining (I've used 'Viakal' and other limescale removers to not much effect).
Also, what's the best way to get the grout in between tiles to look like new again? Mould staining on these, I think.
Thanks in advance!
get yourself some stuff called "Limelite" its seriously nasty and will clean off limescale deposits. Its should clean up the grout a bit. If you want to get your grout to look new again the best way is -- to re-grout, sorry.
Also: get some stuff by "Mr Muscle" - I think its called "Shower Sparkle" or some such naff name. The key thing with this though is that you keep a bottle of it in the shower and spray it on after showering (every time is best). No rubbing, no scrubbing, no effort. It really does work - keeps the glass permanently clear and clean.
An alternative to the shower spray once you've got the glass nice and clean is to use Rain-X. Hey presto, all the water runs off rather than sticking to it. I use it on both our showers to great effect.
You might also wish to invest in a squeegee (sp?) that you can place in the inside of the cubicle - we bought a couple from the US last year and they work a treat. Mind you, most household US showers are the size of the glass house at Kew Gardens so every little helps
You might also wish to invest in a squeegee (sp?) that you can place in the inside of the cubicle - we bought a couple from the US last year and they work a treat. Mind you, most household US showers are the size of the glass house at Kew Gardens so every little helps

Thanks for all the tips guys!! Keep them coming!
What about double glazed windows recommnedations? (See a few threads down).
P.S. Petrolted - don't be upset - look upon all this free, invaluable advice as an extra service for the Pistonheads community. I trust these guys/gals more that some scrote at Homebase!
What about double glazed windows recommnedations? (See a few threads down).
P.S. Petrolted - don't be upset - look upon all this free, invaluable advice as an extra service for the Pistonheads community. I trust these guys/gals more that some scrote at Homebase!
PetrolTed said: I'm seriously worried about the direction that the Gassing Station is taking...
I was looking at the forum at collage and a mate had a glance, asked what forum it was 'a car forum, called pistonheads' He said somethjing along the lines of 'but thre's nothing to with cars'
alan_driver said:
PetrolTed said: I'm seriously worried about the direction that the Gassing Station is taking...
I was looking at the forum at college and a mate had a glance, asked what forum it was 'a car forum, called pistonheads' He said somethjing along the lines of 'but thre's nothing to with cars'
...well if he read all the other forums, instead of just 'General', he'd see stuff ONLY on cars.
I maintain that O/T stuff is genuinely useful to the 'community'.
If you're feeling brave, try Spirit of Salts. I finally found some at the highstreet hardware store, Robert Dyas. Quite surpirsed they sell it. It is 30% hydrochloric acid and will nuke anything limescaley and kill anything living. You've got to be careful using this stuff. Even when you try to dilute it, it produces hydrochloric acid fumes that will burn the inside of your nose and dissolve the chrome plating on taps, shower heads etc. It will clean or dissolve the surface of just about anything.
If you've got mold that has penetrated into the grouting, you will need to treat it with something that soaks into the grout and kills the mould all the way to the back.
If you've got mold that has penetrated into the grouting, you will need to treat it with something that soaks into the grout and kills the mould all the way to the back.
Gassing Station | General Gassing [Archive] | Top of Page | What's New | My Stuff





