Bloody bulbs again
Bloody bulbs again
Author
Discussion

worty

Original Poster:

2,202 posts

254 months

Tuesday 13th February 2007
quotequote all
Just noticed my front nearside sidelight bulb isn't working.Anyone know what sort it is ?
Also is it easy to change. I had a nightmare trying to upgrade the headlight buld and gave up when I couldn't work out how to get the old bulb out of the housing.
worty

m12_nathan

5,138 posts

288 months

Tuesday 13th February 2007
quotequote all
h4 I think if you have a 2.5 or gto3 - lift up the clam and remove the screws that hold the unit in place, replace bulb, then spend ages trying to get it to line up again (maybe mark it's position before you unscrew it?)

worty

Original Poster:

2,202 posts

254 months

Tuesday 13th February 2007
quotequote all
Thanks
worty

F.C.

3,901 posts

237 months

Tuesday 13th February 2007
quotequote all
You can get some pretty trick HID lighing now including H4 (they have a shroud that moves for the main beam)the HID lamps are longer lived and give out much better light to boot.
Mine are H7 4300K temperature rated and give a bright white colour. you can go higher temperature and get from blue to purple tint if that's your thing.
here is an example (not an endorsment of this particular seller.

I think there is a stipulation that your supposed to have headlamp washers with these for strict legality.

http://cgi.ebay.co.uk/H4-Xenon-HID-Co

F.C.

Humpy

1,171 posts

248 months

Tuesday 13th February 2007
quotequote all
Just had to replace mine too. Mine had higher output H4 bulbs (no adaptation needed) available at good old Halfords.
As Nathan said, if in doubt (before you unscrew things) mark the housings with a line (chalk?) to help you line them up when you put it back together. I am rubbish at car DIY smash but even I managed it - so you should be fine

H

worty

Original Poster:

2,202 posts

254 months

Tuesday 13th February 2007
quotequote all
Thanks guys
I'll have a play at the weekend.
Prepare for the request for emergency help when I cock it up
worty

SFM

123 posts

243 months

Tuesday 13th February 2007
quotequote all
F.C. said:
You can get some pretty trick HID lighing now including H4 (they have a shroud that moves for the main beam)the HID lamps are longer lived and give out much better light to boot.
Mine are H7 4300K temperature rated and give a bright white colour. you can go higher temperature and get from blue to purple tint if that's your thing.
here is an example (not an endorsment of this particular seller.

I think there is a stipulation that your supposed to have headlamp washers with these for strict legality.

http://cgi.ebay.co.uk/H4-Xenon-HID-Co

F.C.

Have you fitted these type, is there a big difference? my lights are crap and looking to do some thing with them soon. Do they still dim when the a/c cuts in?

F.C.

3,901 posts

237 months

Wednesday 14th February 2007
quotequote all
I fitted an HID conversion to my m400.
No more yellow 10 meters worth of light.
Can now drive at moderate pace at night without probs.
A bit of a pain to re-align the beams but well worth the effort.

obes

3,298 posts

273 months

Wednesday 14th February 2007
quotequote all
worty said:
Thanks guys
I'll have a play at the weekend.
Prepare for the request for emergency help when I cock it up
worty


I took a load of pics when I did mine, will mail them over mate

V6GTO

11,579 posts

271 months

Wednesday 14th February 2007
quotequote all
obes said:
worty said:
Thanks guys
I'll have a play at the weekend.
Prepare for the request for emergency help when I cock it up
worty


I took a load of pics when I did mine, will mail them over mate


Owen...can't you put them on nobletv or www.GTO3.com so we can all have a look?

Martin.



Edited by V6GTO on Wednesday 14th February 10:02

ThatPhilBrettGuy

11,810 posts

269 months

Wednesday 14th February 2007
quotequote all
Do you have to cut the back of the light off to align the beams? One of the things I know mine will fail the MOT on is headlight alignment.

obes

3,298 posts

273 months

Wednesday 14th February 2007
quotequote all
ThatPhilBrettGuy said:
Do you have to cut the back of the light off to align the beams? One of the things I know mine will fail the MOT on is headlight alignment.


I think its different on the new fangled 3Rs mate hehe
much simpler on the good old 2.5 yes smash

worty

Original Poster:

2,202 posts

254 months

Wednesday 14th February 2007
quotequote all
obes said:
worty said:
Thanks guys
I'll have a play at the weekend.
Prepare for the request for emergency help when I cock it up
worty


I took a load of pics when I did mine, will mail them over mate

Cheers mate

worty

Original Poster:

2,202 posts

254 months

Saturday 17th February 2007
quotequote all
Sorted
It wasn't the bulb just a dodgy connection. Whilst i had it all in bits upgraded to phillips visionplus.
Can't wait for it to get dark now
worty


Edited by worty on Saturday 17th February 13:46

mr noble

6,538 posts

262 months

Saturday 17th February 2007
quotequote all
Had a similar thing with an indicator.

Started flashing twice as fast and rear one was off.

By the time I got home to start trying to fix it, it worked again. confused

obes

3,298 posts

273 months

Monday 26th February 2007
quotequote all
OK, for ref to this thread in future searches, keywords..
H4 H7 Bulb Headlight Headlamp

Here's some pics for changing headlamp bulbs on GTO's and GTO3's
www.obesonline.com/Headlamp.htm